80/20 Small Cabinet - Comprehensive Assembly Plan And Visual Guide

80/20 Small Cabinet Free Plan And Visual Guide

A tall cabinet or enclosure constructed from an aluminum T-slot extrusion frame (P1-P79) with acrylic panels (P81, P86, P91, P96, P101, P106, P111, P116, P121, P126, P131, P136) attached via hangers (P80, P82-P85, etc.). It features two front doors (using P51-P65, P130-P143, P146-P147) and two top doors/lids (using P66-P79, P120-P129, P144-P145). The frame is held together by numerous End Inside Joints (P12-P21, P27-P50, P58-P65, P69-P72, P76-P79) and capped with End Caps (P148-P153). - Cabinet/EnclosureA four-door cabinet constructed from 80/20 aluminum extrusions and acrylic panels. The cabinet has a main frame with a central divider, creating two vertical sections, each with an upper and lower door. - 80/20 Small Cabinet

Phase 1: Group Overview

Angle: back left

80/20 Small Cabinet - Overview back_left

Left Frame Wall

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Right Frame Wall

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Center Frame and Main Assembly

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Fixed Panel Installation

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Door Assembly

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Final Installation and Finishing

1" Rail Hinge Aluminum 80/20x 4

End Cap Aluminum 80/20x 6

Angle: front right

80/20 Small Cabinet - Overview front_right

Left Frame Wall

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Right Frame Wall

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Center Frame and Main Assembly

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Fixed Panel Installation

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Door Assembly

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Final Installation and Finishing

1" Rail Hinge Aluminum 80/20x 4

End Cap Aluminum 80/20x 6

Angle: bottom right

80/20 Small Cabinet - Overview bottom_right

Left Frame Wall

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Right Frame Wall

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Center Frame and Main Assembly

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Fixed Panel Installation

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Door Assembly

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Final Installation and Finishing

1" Rail Hinge Aluminum 80/20x 4

End Cap Aluminum 80/20x 6

Phase 2: Individual Group Assembly

Group: Left Frame Wall

To construct the left side frame of the cabinet.

Connect the front-left vertical post (P1) to the back-left vertical post (P4) using the horizontal rails P8, P10, and P44. Secure them with connectors P12, P13, P20, P21, P45, and P46.

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: back left

P1 (4" 1" T Slot Rail Aluminum 80/20 25.25" length) - its 1" Rail 80/20 F #2, which is back-facing, should connect to part 12's 1" Rail 80/20 M #1. After that, its 1" 80/20 End Hole F #2 must be oriented bottom

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: back left

P4 (4" 1" T Slot Rail Aluminum 80/20 25.25" length) - connect its 1" Rail 80/20 F #4 oriented front links with part 13's 1" Rail 80/20 M #1. Next, ensure its 1" Rail 80/20 F #2 faces back. Additionally, ensure its 1" 80/20 End Hole F #2 faces bottom

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: back left

P8 (4" 1" T Slot Rail Aluminum 80/20 11.5" length) - attach its 1" 80/20 End Hole F #1 facing back to part 13's 1" 80/20 End Hole M #1. After that, connect its 1" 80/20 End Hole F #2 oriented front links with part 12's 1" 80/20 End Hole M #1. After that, ensure its 1" Rail 80/20 F #1 faces bottom, and its 1" Rail 80/20 F #2 should be directed right. Next, its 1" Rail 80/20 F #3 should be directed top. Also, ensure its 1" Rail 80/20 F #4 faces left

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: back left

P10 (4" 1" T Slot Rail Aluminum 80/20 11.5" length) - connect its 1" 80/20 End Hole F #1 oriented front links with part 21's 1" 80/20 End Hole M #1. Also, connect its 1" 80/20 End Hole F #2 oriented back links with part 20's 1" 80/20 End Hole M #1, and its 1" Rail 80/20 F #1 must be oriented top. Additionally, ensure its 1" Rail 80/20 F #2 faces right, and ensure its 1" Rail 80/20 F #3 faces bottom, plus ensure its 1" Rail 80/20 F #4 faces left

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: back left

P44 (4" 1" T Slot Rail Aluminum 80/20 11.5" length) - attach its 1" 80/20 End Hole F #1 facing front to part 46's 1" 80/20 End Hole M #1, plus its 1" 80/20 End Hole F #2, which is back-facing, should connect to part 45's 1" 80/20 End Hole M #1, and its 1" Rail 80/20 F #1 must be oriented top. Also, its 1" Rail 80/20 F #2 should be directed right. Additionally, its 1" Rail 80/20 F #3 should be directed bottom, and its 1" Rail 80/20 F #4 must be oriented left

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: back left

Left Frame Wall - Part End Inside Joint Aluminum 80/20 - back_left

P12 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented front links with part 1's 1" Rail 80/20 F #2. After that, attach its 1" 80/20 End Hole M #1 facing back to part 8's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: front right

Left Frame Wall - Part End Inside Joint Aluminum 80/20 - front_right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

Left Frame Wall - Part End Inside Joint Aluminum 80/20 - bottom_right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P13 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing back to part 4's 1" Rail 80/20 F #4, and attach its 1" 80/20 End Hole M #1 facing front to part 8's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: front right

P13 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing back to part 4's 1" Rail 80/20 F #4, and attach its 1" 80/20 End Hole M #1 facing front to part 8's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

P13 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing back to part 4's 1" Rail 80/20 F #4, and attach its 1" 80/20 End Hole M #1 facing front to part 8's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P20 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing back to part 4's 1" Rail 80/20 F #4, also connect its 1" 80/20 End Hole M #1 oriented front links with part 10's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P21 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented front links with part 1's 1" Rail 80/20 F #2, also connect its 1" 80/20 End Hole M #1 oriented back links with part 10's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P45 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented back links with part 4's 1" Rail 80/20 F #4, plus its 1" 80/20 End Hole M #1, which is front-facing, should connect to part 44's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P46 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing front to part 1's 1" Rail 80/20 F #2. After that, connect its 1" 80/20 End Hole M #1 oriented back links with part 44's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Group: Right Frame Wall

To construct the right side frame of the cabinet.

Connect the front-right vertical post (P3) to the back-right vertical post (P6) using the horizontal rails P7, P11, and P22. Secure them with connectors P16, P17, P18, P19, P49, and P50.

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: back left

P3 (4" 1" T Slot Rail Aluminum 80/20 25.25" length) - attach its 1" Rail 80/20 F #2 facing back to part 17's 1" Rail 80/20 M #1. Also, its 1" 80/20 End Hole F #2 should be directed bottom

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: front right

P3 (4" 1" T Slot Rail Aluminum 80/20 25.25" length) - attach its 1" Rail 80/20 F #2 facing back to part 17's 1" Rail 80/20 M #1. Also, its 1" 80/20 End Hole F #2 should be directed bottom

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: bottom right

P3 (4" 1" T Slot Rail Aluminum 80/20 25.25" length) - attach its 1" Rail 80/20 F #2 facing back to part 17's 1" Rail 80/20 M #1. Also, its 1" 80/20 End Hole F #2 should be directed bottom

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: back left

P6 (4" 1" T Slot Rail Aluminum 80/20 25.25" length) - its 1" Rail 80/20 F #4, which is front-facing, should connect to part 16's 1" Rail 80/20 M #1, and its 1" Rail 80/20 F #2 must be oriented back. Additionally, its 1" 80/20 End Hole F #2 needs to point bottom

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: back left

P7 (4" 1" T Slot Rail Aluminum 80/20 11.5" length) - connect its 1" 80/20 End Hole F #1 oriented back links with part 16's 1" 80/20 End Hole M #1, then its 1" 80/20 End Hole F #2, which is front-facing, should connect to part 17's 1" 80/20 End Hole M #1, then ensure its 1" Rail 80/20 F #1 faces bottom, then ensure its 1" Rail 80/20 F #2 faces right, and its 1" Rail 80/20 F #3 must be oriented top. Also, its 1" Rail 80/20 F #4 should be directed left

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: back left

P11 (4" 1" T Slot Rail Aluminum 80/20 11.5" length) - its 1" 80/20 End Hole F #1, which is front-facing, should connect to part 19's 1" 80/20 End Hole M #1. Additionally, its 1" 80/20 End Hole F #2, which is back-facing, should connect to part 18's 1" 80/20 End Hole M #1, and its 1" Rail 80/20 F #1 needs to point top. Next, its 1" Rail 80/20 F #2 should be directed right. Next, its 1" Rail 80/20 F #3 must be oriented bottom, then its 1" Rail 80/20 F #4 must be oriented left

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: back left

P22 (4" 1" T Slot Rail Aluminum 80/20 11.5" length) - its 1" 80/20 End Hole F #1, which is front-facing, should connect to part 49's 1" 80/20 End Hole M #1, plus connect its 1" 80/20 End Hole F #2 oriented back links with part 50's 1" 80/20 End Hole M #1, then ensure its 1" Rail 80/20 F #1 faces top. Additionally, its 1" Rail 80/20 F #2 must be oriented right. Also, its 1" Rail 80/20 F #3 must be oriented bottom. After that, its 1" Rail 80/20 F #4 needs to point left

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: back left

Right Frame Wall - Part End Inside Joint Aluminum 80/20 - back_left

P16 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented back links with part 6's 1" Rail 80/20 F #4. After that, connect its 1" 80/20 End Hole M #1 oriented front links with part 7's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: front right

Right Frame Wall - Part End Inside Joint Aluminum 80/20 - front_right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

Right Frame Wall - Part End Inside Joint Aluminum 80/20 - bottom_right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P17 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented front links with part 3's 1" Rail 80/20 F #2. Also, connect its 1" 80/20 End Hole M #1 oriented back links with part 7's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P18 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing back to part 6's 1" Rail 80/20 F #4, and attach its 1" 80/20 End Hole M #1 facing front to part 11's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: front right

P18 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing back to part 6's 1" Rail 80/20 F #4, and attach its 1" 80/20 End Hole M #1 facing front to part 11's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

P18 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing back to part 6's 1" Rail 80/20 F #4, and attach its 1" 80/20 End Hole M #1 facing front to part 11's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P19 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented front links with part 3's 1" Rail 80/20 F #2, also attach its 1" 80/20 End Hole M #1 facing back to part 11's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P49 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented front links with part 3's 1" Rail 80/20 F #2, plus attach its 1" 80/20 End Hole M #1 facing back to part 22's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P50 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing back to part 6's 1" Rail 80/20 F #4, then connect its 1" 80/20 End Hole M #1 oriented front links with part 22's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Group: Center Frame and Main Assembly

To build the central divider and connect it to the left and right walls to complete the cabinet skeleton.

First, assemble the central divider by connecting vertical posts P2 and P5 with rail P9 and connectors P14 and P15. Then, attach the completed Left and Right Frame Walls to this central divider using the remaining horizontal rails (P24, P25, P26, P33, P36, P37, P42) and their corresponding connectors to form the main cabinet skeleton.

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: back left

Center Frame and Main Assembly - Part 80/20 1

P2 (4" 1" T Slot Rail Aluminum 80/20 25.25" length) - attach its 1" Rail 80/20 F #1 facing left to part 28's 1" Rail 80/20 M #1. Next, connect its 1" Rail 80/20 F #2 oriented back links with part 14's 1" Rail 80/20 M #1. Additionally, attach its 1" Rail 80/20 F #3 facing right to part 29's 1" Rail 80/20 M #1. Additionally, ensure its 1" Rail 80/20 F #4 faces front, and ensure its 1" 80/20 End Hole F #2 faces bottom

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: back left

P5 (4" 1" T Slot Rail Aluminum 80/20 25.25" length) - attach its 1" Rail 80/20 F #1 facing left to part 32's 1" Rail 80/20 M #1. Additionally, connect its 1" Rail 80/20 F #3 oriented right links with part 35's 1" Rail 80/20 M #1, and its 1" Rail 80/20 F #4, which is front-facing, should connect to part 15's 1" Rail 80/20 M #1, also its 1" Rail 80/20 F #2 needs to point back, then its 1" 80/20 End Hole F #2 must be oriented bottom

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 25.25" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: back left

P9 (4" 1" T Slot Rail Aluminum 80/20 11.5" length) - connect its 1" 80/20 End Hole F #1 oriented front links with part 14's 1" 80/20 End Hole M #1, also attach its 1" 80/20 End Hole F #2 facing back to part 15's 1" 80/20 End Hole M #1. Additionally, its 1" Rail 80/20 F #1 needs to point bottom. Next, its 1" Rail 80/20 F #2 should be directed left, and its 1" Rail 80/20 F #3 should be directed top, plus its 1" Rail 80/20 F #4 should be directed right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 11.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: back left

Center Frame and Main Assembly - Part End Inside Joint Aluminum 80/20 - back_left

P14 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing front to part 2's 1" Rail 80/20 F #2, plus connect its 1" 80/20 End Hole M #1 oriented back links with part 9's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: front right

Center Frame and Main Assembly - Part End Inside Joint Aluminum 80/20 - front_right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

Center Frame and Main Assembly - Part End Inside Joint Aluminum 80/20 - bottom_right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P15 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 5's 1" Rail 80/20 F #4. Next, attach its 1" 80/20 End Hole M #1 facing front to part 9's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: back left

P24 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - connect its 1" 80/20 End Hole F #1 oriented right links with part 32's 1" 80/20 End Hole M #1. Also, its 1" 80/20 End Hole F #2, which is left-facing, should connect to part 31's 1" 80/20 End Hole M #1. Also, ensure its 1" Rail 80/20 F #1 faces top. Also, its 1" Rail 80/20 F #3 should be directed bottom. After that, ensure its 1" Rail 80/20 F #4 faces front

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: back left

P25 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - attach its 1" 80/20 End Hole F #1 facing right to part 28's 1" 80/20 End Hole M #1, also connect its 1" 80/20 End Hole F #2 oriented left links with part 27's 1" 80/20 End Hole M #1. Additionally, its 1" Rail 80/20 F #1 must be oriented bottom, and its 1" Rail 80/20 F #2 must be oriented front. Next, its 1" Rail 80/20 F #4 should be directed back

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: back left

P26 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - connect its 1" 80/20 End Hole F #1 oriented right links with part 30's 1" 80/20 End Hole M #1, plus its 1" 80/20 End Hole F #2, which is left-facing, should connect to part 29's 1" 80/20 End Hole M #1. Additionally, its 1" Rail 80/20 F #1 should be directed bottom. Also, ensure its 1" Rail 80/20 F #2 faces front. Additionally, its 1" Rail 80/20 F #4 needs to point back

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: back left

P33 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - attach its 1" 80/20 End Hole F #1 facing left to part 35's 1" 80/20 End Hole M #1. Additionally, attach its 1" 80/20 End Hole F #2 facing right to part 34's 1" 80/20 End Hole M #1. After that, its 1" Rail 80/20 F #1 should be directed top. Also, its 1" Rail 80/20 F #2 must be oriented front. After that, ensure its 1" Rail 80/20 F #3 faces bottom

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: back left

P36 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - its 1" 80/20 End Hole F #1, which is right-facing, should connect to part 41's 1" 80/20 End Hole M #1, and attach its 1" 80/20 End Hole F #2 facing left to part 40's 1" 80/20 End Hole M #1, also its 1" Rail 80/20 F #1 needs to point bottom. Next, ensure its 1" Rail 80/20 F #2 faces front

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: back left

P37 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - connect its 1" 80/20 End Hole F #1 oriented right links with part 39's 1" 80/20 End Hole M #1. Additionally, connect its 1" 80/20 End Hole F #2 oriented left links with part 38's 1" 80/20 End Hole M #1. Also, its 1" Rail 80/20 F #1 should be directed bottom, and ensure its 1" Rail 80/20 F #2 faces front

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: back left

P42 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - connect its 1" 80/20 End Hole F #1 oriented left links with part 47's 1" 80/20 End Hole M #1. After that, its 1" 80/20 End Hole F #2, which is right-facing, should connect to part 48's 1" 80/20 End Hole M #1, and ensure its 1" Rail 80/20 F #2 faces front. Next, its 1" Rail 80/20 F #3 should be directed bottom. Next, its 1" Rail 80/20 F #4 should be directed back

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P27 (End Inside Joint Aluminum) - attach its 1" 80/20 End Hole M #1 facing right to part 25's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: front right

P27 (End Inside Joint Aluminum) - attach its 1" 80/20 End Hole M #1 facing right to part 25's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

P27 (End Inside Joint Aluminum) - attach its 1" 80/20 End Hole M #1 facing right to part 25's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P28 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is right-facing, should connect to part 2's 1" Rail 80/20 F #1. Also, connect its 1" 80/20 End Hole M #1 oriented left links with part 25's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P29 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing left to part 2's 1" Rail 80/20 F #3. Next, its 1" 80/20 End Hole M #1, which is right-facing, should connect to part 26's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P30 (End Inside Joint Aluminum) - attach its 1" 80/20 End Hole M #1 facing left to part 26's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: front right

P30 (End Inside Joint Aluminum) - attach its 1" 80/20 End Hole M #1 facing left to part 26's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

P30 (End Inside Joint Aluminum) - attach its 1" 80/20 End Hole M #1 facing left to part 26's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P31 (End Inside Joint Aluminum) - its 1" 80/20 End Hole M #1, which is right-facing, should connect to part 24's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: front right

P31 (End Inside Joint Aluminum) - its 1" 80/20 End Hole M #1, which is right-facing, should connect to part 24's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

P31 (End Inside Joint Aluminum) - its 1" 80/20 End Hole M #1, which is right-facing, should connect to part 24's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P32 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing right to part 5's 1" Rail 80/20 F #1. Next, connect its 1" 80/20 End Hole M #1 oriented left links with part 24's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P34 (End Inside Joint Aluminum) - connect its 1" 80/20 End Hole M #1 oriented left links with part 33's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: front right

P34 (End Inside Joint Aluminum) - connect its 1" 80/20 End Hole M #1 oriented left links with part 33's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

P34 (End Inside Joint Aluminum) - connect its 1" 80/20 End Hole M #1 oriented left links with part 33's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P35 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing left to part 5's 1" Rail 80/20 F #3. After that, attach its 1" 80/20 End Hole M #1 facing right to part 33's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P38 (End Inside Joint Aluminum) - its 1" 80/20 End Hole M #1, which is right-facing, should connect to part 37's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: front right

P38 (End Inside Joint Aluminum) - its 1" 80/20 End Hole M #1, which is right-facing, should connect to part 37's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

P38 (End Inside Joint Aluminum) - its 1" 80/20 End Hole M #1, which is right-facing, should connect to part 37's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P39 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented right links with part 5's 1" Rail 80/20 F #1. Additionally, attach its 1" 80/20 End Hole M #1 facing left to part 37's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P40 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented left links with part 5's 1" Rail 80/20 F #3, then attach its 1" 80/20 End Hole M #1 facing right to part 36's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P41 (End Inside Joint Aluminum) - its 1" 80/20 End Hole M #1, which is left-facing, should connect to part 36's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: front right

P41 (End Inside Joint Aluminum) - its 1" 80/20 End Hole M #1, which is left-facing, should connect to part 36's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

P41 (End Inside Joint Aluminum) - its 1" 80/20 End Hole M #1, which is left-facing, should connect to part 36's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P47 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented left links with part 2's 1" Rail 80/20 F #3, also connect its 1" 80/20 End Hole M #1 oriented right links with part 42's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P48 (End Inside Joint Aluminum) - attach its 1" 80/20 End Hole M #1 facing left to part 42's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: front right

P48 (End Inside Joint Aluminum) - attach its 1" 80/20 End Hole M #1 facing left to part 42's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

P48 (End Inside Joint Aluminum) - attach its 1" 80/20 End Hole M #1 facing left to part 42's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Group: Fixed Panel Installation

To install all the fixed acrylic panels for the sides, back, and top of the cabinet.

Attach the various panel hangers to the inside of the cabinet frame rails. Install the acrylic side panels (P91, P96, P101, P106), back panels (P111, P116), and top panels (P81, P86) by sliding them into the hangers.

Part: 1' Acrylic Panel x 14.25" - Angle: back left

Fixed Panel Installation - Part 1' Acrylic Panel x 14.25

P81 (1' Acrylic Panel 14.25" length) - connect its 1" 80 20 Panel #1 oriented top links with part 84's 1" 80 20 Panel Holder #1. Also, connect its 1" 80 20 Panel #2 oriented top links with part 82's 1" 80 20 Panel Holder #1, plus connect its 1" 80 20 Panel #3 oriented top links with part 83's 1" 80 20 Panel Holder #1. After that, connect its 1" 80 20 Panel #4 oriented top links with part 80's 1" 80 20 Panel Holder #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 14.25" - Angle: front right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 14.25" - Angle: bottom right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 14" - Angle: back left

Fixed Panel Installation - Part 1' Acrylic Panel x 14

P86 (1' Acrylic Panel 14" length) - connect its 1" 80 20 Panel #1 oriented top links with part 88's 1" 80 20 Panel Holder #1, then its 1" 80 20 Panel #2, which is top-facing, should connect to part 87's 1" 80 20 Panel Holder #1. After that, attach its 1" 80 20 Panel #3 facing top to part 89's 1" 80 20 Panel Holder #1. Next, its 1" 80 20 Panel #4, which is top-facing, should connect to part 85's 1" 80 20 Panel Holder #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 14" - Angle: front right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 14" - Angle: bottom right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 9.5" - Angle: back left

Fixed Panel Installation - Part 1' Acrylic Panel x 9.5

P91 (1' Acrylic Panel 9.5" length) - connect its 1" 80 20 Panel #1 oriented left links with part 93's 1" 80 20 Panel Holder #1. Additionally, its 1" 80 20 Panel #2, which is left-facing, should connect to part 94's 1" 80 20 Panel Holder #1. After that, its 1" 80 20 Panel #3, which is left-facing, should connect to part 92's 1" 80 20 Panel Holder #1. Next, connect its 1" 80 20 Panel #4 oriented left links with part 90's 1" 80 20 Panel Holder #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 9.5" - Angle: front right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 9.5" - Angle: bottom right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 14" - Angle: back left

P96 (1' Acrylic Panel 14" length) - attach its 1" 80 20 Panel #1 facing left to part 99's 1" 80 20 Panel Holder #1. Next, attach its 1" 80 20 Panel #2 facing left to part 98's 1" 80 20 Panel Holder #1, then attach its 1" 80 20 Panel #3 facing left to part 97's 1" 80 20 Panel Holder #1, plus attach its 1" 80 20 Panel #4 facing left to part 95's 1" 80 20 Panel Holder #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 14" - Angle: front right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 14" - Angle: bottom right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 9.5" - Angle: back left

P101 (1' Acrylic Panel 9.5" length) - connect its 1" 80 20 Panel #1 oriented right links with part 102's 1" 80 20 Panel Holder #1. After that, attach its 1" 80 20 Panel #2 facing right to part 100's 1" 80 20 Panel Holder #1, and attach its 1" 80 20 Panel #3 facing right to part 103's 1" 80 20 Panel Holder #1. Additionally, attach its 1" 80 20 Panel #4 facing right to part 104's 1" 80 20 Panel Holder #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 9.5" - Angle: front right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 9.5" - Angle: bottom right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 14" - Angle: back left

P106 (1' Acrylic Panel 14" length) - attach its 1" 80 20 Panel #1 facing right to part 109's 1" 80 20 Panel Holder #1. After that, attach its 1" 80 20 Panel #2 facing right to part 108's 1" 80 20 Panel Holder #1, plus its 1" 80 20 Panel #3, which is right-facing, should connect to part 107's 1" 80 20 Panel Holder #1. Additionally, connect its 1" 80 20 Panel #4 oriented right links with part 105's 1" 80 20 Panel Holder #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 14" - Angle: front right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1' Acrylic Panel x 14" - Angle: bottom right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 2' Acrylic Panel x 14" - Angle: back left

Fixed Panel Installation - Part 2' Acrylic Panel x 14

P111 (2' Acrylic Panel 14" length) - attach its 1" 80 20 Panel #1 facing back to part 113's 1" 80 20 Panel Holder #1. After that, its 1" 80 20 Panel #2, which is back-facing, should connect to part 110's 1" 80 20 Panel Holder #1, and connect its 1" 80 20 Panel #3 oriented back links with part 114's 1" 80 20 Panel Holder #1, then connect its 1" 80 20 Panel #4 oriented back links with part 112's 1" 80 20 Panel Holder #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 2' Acrylic Panel x 14" - Angle: front right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 2' Acrylic Panel x 14" - Angle: bottom right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 2' Acrylic Panel x 14" - Angle: back left

P116 (2' Acrylic Panel 14" length) - its 1" 80 20 Panel #1, which is back-facing, should connect to part 118's 1" 80 20 Panel Holder #1, also attach its 1" 80 20 Panel #2 facing back to part 115's 1" 80 20 Panel Holder #1, plus connect its 1" 80 20 Panel #3 oriented back links with part 119's 1" 80 20 Panel Holder #1, also attach its 1" 80 20 Panel #4 facing back to part 117's 1" 80 20 Panel Holder #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 2' Acrylic Panel x 14" - Angle: front right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 2' Acrylic Panel x 14" - Angle: bottom right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P80 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is bottom-facing, should connect to part 81's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P80 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is bottom-facing, should connect to part 81's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P80 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is bottom-facing, should connect to part 81's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P82 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing bottom to part 81's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P82 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing bottom to part 81's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P82 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing bottom to part 81's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P83 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing bottom to part 81's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P83 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing bottom to part 81's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P83 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing bottom to part 81's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P84 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is bottom-facing, should connect to part 81's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P84 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is bottom-facing, should connect to part 81's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P84 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is bottom-facing, should connect to part 81's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P85 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is bottom-facing, should connect to part 86's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P85 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is bottom-facing, should connect to part 86's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P85 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is bottom-facing, should connect to part 86's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P87 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented bottom links with part 86's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P87 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented bottom links with part 86's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P87 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented bottom links with part 86's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P88 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing bottom to part 86's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P88 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing bottom to part 86's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P88 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing bottom to part 86's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P89 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is bottom-facing, should connect to part 86's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P89 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is bottom-facing, should connect to part 86's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P89 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is bottom-facing, should connect to part 86's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P90 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing right to part 91's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P90 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing right to part 91's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P90 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing right to part 91's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P92 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing right to part 91's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P92 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing right to part 91's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P92 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing right to part 91's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P93 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is right-facing, should connect to part 91's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P93 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is right-facing, should connect to part 91's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P93 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is right-facing, should connect to part 91's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P94 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is right-facing, should connect to part 91's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P94 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is right-facing, should connect to part 91's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P94 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is right-facing, should connect to part 91's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P95 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing right to part 96's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P95 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing right to part 96's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P95 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing right to part 96's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P97 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is right-facing, should connect to part 96's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P97 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is right-facing, should connect to part 96's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P97 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is right-facing, should connect to part 96's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P98 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is right-facing, should connect to part 96's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P98 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is right-facing, should connect to part 96's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P98 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is right-facing, should connect to part 96's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P99 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing right to part 96's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P99 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing right to part 96's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P99 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing right to part 96's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P100 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented left links with part 101's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P100 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented left links with part 101's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P100 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented left links with part 101's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P102 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented left links with part 101's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P102 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented left links with part 101's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P102 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented left links with part 101's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P103 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is left-facing, should connect to part 101's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P103 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is left-facing, should connect to part 101's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P103 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is left-facing, should connect to part 101's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P104 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is left-facing, should connect to part 101's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P104 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is left-facing, should connect to part 101's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P104 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is left-facing, should connect to part 101's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P105 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing left to part 106's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P105 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing left to part 106's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P105 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing left to part 106's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P107 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing left to part 106's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P107 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing left to part 106's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P107 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing left to part 106's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P108 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented left links with part 106's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P108 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented left links with part 106's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P108 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented left links with part 106's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P109 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented left links with part 106's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P109 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented left links with part 106's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P109 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented left links with part 106's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P110 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented front links with part 111's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P110 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented front links with part 111's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P110 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented front links with part 111's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P112 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing front to part 111's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P112 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing front to part 111's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P112 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" 80 20 Panel Holder #1 facing front to part 111's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P113 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented front links with part 111's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P113 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented front links with part 111's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P113 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented front links with part 111's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P114 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is front-facing, should connect to part 111's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P114 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is front-facing, should connect to part 111's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P114 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is front-facing, should connect to part 111's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P115 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is front-facing, should connect to part 116's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P115 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is front-facing, should connect to part 116's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P115 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" 80 20 Panel Holder #1, which is front-facing, should connect to part 116's 1" 80 20 Panel #2

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P117 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented front links with part 116's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P117 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented front links with part 116's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P117 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented front links with part 116's 1" 80 20 Panel #4

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P118 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented front links with part 116's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P118 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented front links with part 116's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P118 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented front links with part 116's 1" 80 20 Panel #1

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P119 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented front links with part 116's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

P119 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented front links with part 116's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

P119 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" 80 20 Panel Holder #1 oriented front links with part 116's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Group: Door Assembly

To assemble the four doors, complete with frames, panels, and handles.

Assemble the four separate door units. For each door, create a frame from the smaller rails and connectors. Install the acrylic panels (P121, P126, P131, P136) into the frames using the panel hangers. Finally, attach a pull handle (P144-P147) to the front of each door.

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: back left

P23 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - its 1" Rail 80/20 F #1, which is top-facing, should connect to part 59's 1" Rail 80/20 M #1, also its 1" 80/20 End Hole F #1 needs to point right, plus its 1" Rail 80/20 F #2 should be directed back, then its 1" Rail 80/20 F #3 needs to point bottom, then its 1" Rail 80/20 F #4 needs to point front, and ensure its 1" 80/20 End Hole F #2 faces left

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: back left

P43 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - connect its 1" Rail 80/20 F #1 oriented top links with part 69's 1" Rail 80/20 M #1, plus its 1" 80/20 End Hole F #1 needs to point left. After that, its 1" Rail 80/20 F #2 should be directed front. Also, ensure its 1" Rail 80/20 F #3 faces bottom. Additionally, its 1" Rail 80/20 F #4 needs to point back. After that, ensure its 1" 80/20 End Hole F #2 faces right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 12.25" - Angle: back left

P51 (4" 1" T Slot Rail Aluminum 80/20 12.25" length) - connect its 1" 80/20 End Hole F #1 oriented top links with part 58's 1" 80/20 End Hole M #1. Also, attach its 1" Rail 80/20 F #2 facing front to part 130's 1" Rail 80/20 M #1. After that, its 1" 80/20 End Hole F #2, which is bottom-facing, should connect to part 59's 1" 80/20 End Hole M #1, plus its 1" Rail 80/20 F #1 needs to point right. After that, ensure its 1" Rail 80/20 F #3 faces left, and its 1" Rail 80/20 F #4 needs to point back

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 12.25" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 12.25" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: back left

P52 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - its 1" Rail 80/20 F #1, which is bottom-facing, should connect to part 58's 1" Rail 80/20 M #1, plus its 1" 80/20 End Hole F #1 should be directed right. After that, its 1" Rail 80/20 F #2 should be directed front, also its 1" Rail 80/20 F #3 should be directed top. Also, its 1" Rail 80/20 F #4 needs to point back, also its 1" 80/20 End Hole F #2 needs to point left

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 12.25" - Angle: back left

P53 (4" 1" T Slot Rail Aluminum 80/20 12.25" length) - attach its 1" 80/20 End Hole F #1 facing top to part 61's 1" 80/20 End Hole M #1, then its 1" Rail 80/20 F #4, which is front-facing, should connect to part 132's 1" Rail 80/20 M #1. Additionally, its 1" 80/20 End Hole F #2, which is bottom-facing, should connect to part 60's 1" 80/20 End Hole M #1, also its 1" Rail 80/20 F #1 should be directed left. Also, ensure its 1" Rail 80/20 F #2 faces back, then ensure its 1" Rail 80/20 F #3 faces right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 12.25" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 12.25" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: back left

P54 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - its 1" Rail 80/20 F #1, which is top-facing, should connect to part 63's 1" Rail 80/20 M #1. Also, its 1" 80/20 End Hole F #1 should be directed right. After that, its 1" Rail 80/20 F #2 needs to point back, then its 1" Rail 80/20 F #3 should be directed bottom, also its 1" Rail 80/20 F #4 must be oriented front, plus its 1" 80/20 End Hole F #2 should be directed left

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 12.25" - Angle: back left

P55 (4" 1" T Slot Rail Aluminum 80/20 12.25" length) - its 1" 80/20 End Hole F #1, which is top-facing, should connect to part 62's 1" 80/20 End Hole M #1. Also, connect its 1" Rail 80/20 F #2 oriented front links with part 135's 1" Rail 80/20 M #1. Also, attach its 1" 80/20 End Hole F #2 facing bottom to part 63's 1" 80/20 End Hole M #1. Next, its 1" Rail 80/20 F #1 needs to point right, also its 1" Rail 80/20 F #3 must be oriented left, also its 1" Rail 80/20 F #4 needs to point back

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 12.25" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 12.25" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 12.25" - Angle: back left

P56 (4" 1" T Slot Rail Aluminum 80/20 12.25" length) - its 1" 80/20 End Hole F #1, which is top-facing, should connect to part 64's 1" 80/20 End Hole M #1, then attach its 1" Rail 80/20 F #4 facing front to part 138's 1" Rail 80/20 M #1. Next, its 1" 80/20 End Hole F #2, which is bottom-facing, should connect to part 65's 1" 80/20 End Hole M #1. After that, its 1" Rail 80/20 F #1 needs to point left, also its 1" Rail 80/20 F #2 should be directed back, then its 1" Rail 80/20 F #3 must be oriented right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 12.25" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 12.25" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: back left

P57 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - connect its 1" Rail 80/20 F #1 oriented bottom links with part 62's 1" Rail 80/20 M #1, also ensure its 1" 80/20 End Hole F #1 faces right, and its 1" Rail 80/20 F #2 must be oriented front, plus ensure its 1" Rail 80/20 F #3 faces top, also its 1" Rail 80/20 F #4 should be directed back, also its 1" 80/20 End Hole F #2 should be directed left

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 8" - Angle: back left

P66 (4" 1" T Slot Rail Aluminum 80/20 8" length) - connect its 1" 80/20 End Hole F #1 oriented top links with part 71's 1" 80/20 End Hole M #1, and attach its 1" Rail 80/20 F #2 facing front to part 120's 1" Rail 80/20 M #1, plus connect its 1" 80/20 End Hole F #2 oriented bottom links with part 69's 1" 80/20 End Hole M #1. Additionally, its 1" Rail 80/20 F #1 should be directed right. Next, its 1" Rail 80/20 F #3 must be oriented left. After that, its 1" Rail 80/20 F #4 should be directed back

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 8" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 8" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: back left

P67 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - connect its 1" Rail 80/20 F #1 oriented bottom links with part 71's 1" Rail 80/20 M #1. Additionally, connect its 1" Rail 80/20 F #2 oriented front links with part 144's 1" Rail 80/20 M #1. Next, ensure its 1" 80/20 End Hole F #1 faces right, and its 1" Rail 80/20 F #3 needs to point top, and its 1" Rail 80/20 F #4 must be oriented back, then its 1" 80/20 End Hole F #2 must be oriented left

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 8" - Angle: back left

P68 (4" 1" T Slot Rail Aluminum 80/20 8" length) - its 1" 80/20 End Hole F #1, which is top-facing, should connect to part 72's 1" 80/20 End Hole M #1, plus connect its 1" Rail 80/20 F #4 oriented front links with part 123's 1" Rail 80/20 M #1. Additionally, connect its 1" 80/20 End Hole F #2 oriented bottom links with part 70's 1" 80/20 End Hole M #1, then its 1" Rail 80/20 F #1 should be directed left, then ensure its 1" Rail 80/20 F #2 faces back, and its 1" Rail 80/20 F #3 should be directed right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 8" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 8" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 8" - Angle: back left

P73 (4" 1" T Slot Rail Aluminum 80/20 8" length) - its 1" 80/20 End Hole F #1, which is top-facing, should connect to part 78's 1" 80/20 End Hole M #1, plus attach its 1" Rail 80/20 F #4 facing front to part 127's 1" Rail 80/20 M #1, then its 1" 80/20 End Hole F #2, which is bottom-facing, should connect to part 77's 1" 80/20 End Hole M #1. Additionally, its 1" Rail 80/20 F #1 must be oriented left, plus its 1" Rail 80/20 F #2 should be directed back. Next, its 1" Rail 80/20 F #3 should be directed right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 8" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 8" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 8" - Angle: back left

P74 (4" 1" T Slot Rail Aluminum 80/20 8" length) - connect its 1" 80/20 End Hole F #1 oriented top links with part 79's 1" 80/20 End Hole M #1. Next, attach its 1" Rail 80/20 F #2 facing front to part 125's 1" Rail 80/20 M #1, and connect its 1" 80/20 End Hole F #2 oriented bottom links with part 76's 1" 80/20 End Hole M #1, also its 1" Rail 80/20 F #1 needs to point right, then its 1" Rail 80/20 F #3 must be oriented left, and its 1" Rail 80/20 F #4 should be directed back

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 8" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 8" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: back left

P75 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - its 1" Rail 80/20 F #1, which is bottom-facing, should connect to part 78's 1" Rail 80/20 M #1, also attach its 1" Rail 80/20 F #2 facing front to part 145's 1" Rail 80/20 M #1. Also, its 1" 80/20 End Hole F #1 must be oriented right. Next, its 1" Rail 80/20 F #3 needs to point top. Additionally, its 1" Rail 80/20 F #4 should be directed back, also ensure its 1" 80/20 End Hole F #2 faces left

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 80/20 1" T Slot Rail Aluminum 80/20 x 13.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: back left

Door Assembly - Part End Inside Joint Aluminum 80/20 - back_left

P58 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is top-facing, should connect to part 52's 1" Rail 80/20 F #1, also attach its 1" 80/20 End Hole M #1 facing bottom to part 51's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: front right

Door Assembly - Part End Inside Joint Aluminum 80/20 - front_right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

Door Assembly - Part End Inside Joint Aluminum 80/20 - bottom_right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P59 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented bottom links with part 23's 1" Rail 80/20 F #1. After that, attach its 1" 80/20 End Hole M #1 facing top to part 51's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P60 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented bottom links with part 23's 1" Rail 80/20 F #1, and connect its 1" 80/20 End Hole M #1 oriented top links with part 53's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P61 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is top-facing, should connect to part 52's 1" Rail 80/20 F #1, then attach its 1" 80/20 End Hole M #1 facing bottom to part 53's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P62 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing top to part 57's 1" Rail 80/20 F #1, and connect its 1" 80/20 End Hole M #1 oriented bottom links with part 55's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P63 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented bottom links with part 54's 1" Rail 80/20 F #1. Next, connect its 1" 80/20 End Hole M #1 oriented top links with part 55's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P64 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is top-facing, should connect to part 57's 1" Rail 80/20 F #1. Also, its 1" 80/20 End Hole M #1, which is bottom-facing, should connect to part 56's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P65 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing bottom to part 54's 1" Rail 80/20 F #1. Next, attach its 1" 80/20 End Hole M #1 facing top to part 56's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: front right

P65 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing bottom to part 54's 1" Rail 80/20 F #1. Next, attach its 1" 80/20 End Hole M #1 facing top to part 56's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

P65 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing bottom to part 54's 1" Rail 80/20 F #1. Next, attach its 1" 80/20 End Hole M #1 facing top to part 56's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P69 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented bottom links with part 43's 1" Rail 80/20 F #1, then its 1" 80/20 End Hole M #1, which is top-facing, should connect to part 66's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P70 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing bottom to part 43's 1" Rail 80/20 F #1, plus its 1" 80/20 End Hole M #1, which is top-facing, should connect to part 68's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P71 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing top to part 67's 1" Rail 80/20 F #1. After that, connect its 1" 80/20 End Hole M #1 oriented bottom links with part 66's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P72 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented top links with part 67's 1" Rail 80/20 F #1, also attach its 1" 80/20 End Hole M #1 facing bottom to part 68's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P76 (End Inside Joint Aluminum) - connect its 1" 80/20 End Hole M #1 oriented top links with part 74's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: front right

P76 (End Inside Joint Aluminum) - connect its 1" 80/20 End Hole M #1 oriented top links with part 74's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

P76 (End Inside Joint Aluminum) - connect its 1" 80/20 End Hole M #1 oriented top links with part 74's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P77 (End Inside Joint Aluminum) - its 1" 80/20 End Hole M #1, which is top-facing, should connect to part 73's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: front right

P77 (End Inside Joint Aluminum) - its 1" 80/20 End Hole M #1, which is top-facing, should connect to part 73's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

P77 (End Inside Joint Aluminum) - its 1" 80/20 End Hole M #1, which is top-facing, should connect to part 73's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P78 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented top links with part 75's 1" Rail 80/20 F #1. Next, attach its 1" 80/20 End Hole M #1 facing bottom to part 73's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: back left

P79 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing top to part 75's 1" Rail 80/20 F #1. Additionally, connect its 1" 80/20 End Hole M #1 oriented bottom links with part 74's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: End Inside Joint Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1' Acrylic Panel x 8.5" - Angle: back left

Door Assembly - Part 1' Acrylic Panel x 8.5

P121 (1' Acrylic Panel 8.5" length) - connect its 1" 80 20 Panel #1 oriented front links with part 124's 1" 80 20 Panel Holder #1. Also, its 1" 80 20 Panel #2, which is front-facing, should connect to part 122's 1" 80 20 Panel Holder #1. Next, attach its 1" 80 20 Panel #3 facing front to part 123's 1" 80 20 Panel Holder #1, and its 1" 80 20 Panel #4, which is front-facing, should connect to part 120's 1" 80 20 Panel Holder #1

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1' Acrylic Panel x 8.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1' Acrylic Panel x 8.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1' Acrylic Panel x 8.5" - Angle: back left

P126 (1' Acrylic Panel 8.5" length) - its 1" 80 20 Panel #1, which is front-facing, should connect to part 129's 1" 80 20 Panel Holder #1. After that, connect its 1" 80 20 Panel #2 oriented front links with part 128's 1" 80 20 Panel Holder #1. After that, connect its 1" 80 20 Panel #3 oriented front links with part 127's 1" 80 20 Panel Holder #1, plus its 1" 80 20 Panel #4, which is front-facing, should connect to part 125's 1" 80 20 Panel Holder #1

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1' Acrylic Panel x 8.5" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1' Acrylic Panel x 8.5" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1' Acrylic Panel x 13" - Angle: back left

Door Assembly - Part 1' Acrylic Panel x 13

P131 (1' Acrylic Panel 13" length) - connect its 1" 80 20 Panel #1 oriented front links with part 134's 1" 80 20 Panel Holder #1, and connect its 1" 80 20 Panel #2 oriented front links with part 133's 1" 80 20 Panel Holder #1. Additionally, attach its 1" 80 20 Panel #3 facing front to part 132's 1" 80 20 Panel Holder #1, also connect its 1" 80 20 Panel #4 oriented front links with part 130's 1" 80 20 Panel Holder #1

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1' Acrylic Panel x 13" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1' Acrylic Panel x 13" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1' Acrylic Panel x 13" - Angle: back left

P136 (1' Acrylic Panel 13" length) - attach its 1" 80 20 Panel #1 facing front to part 139's 1" 80 20 Panel Holder #1, also attach its 1" 80 20 Panel #2 facing front to part 137's 1" 80 20 Panel Holder #1. Additionally, its 1" 80 20 Panel #3, which is front-facing, should connect to part 138's 1" 80 20 Panel Holder #1. Next, its 1" 80 20 Panel #4, which is front-facing, should connect to part 135's 1" 80 20 Panel Holder #1

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1' Acrylic Panel x 13" - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1' Acrylic Panel x 13" - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P120 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 66's 1" Rail 80/20 F #2, then connect its 1" 80 20 Panel Holder #1 oriented back links with part 121's 1" 80 20 Panel #4

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P122 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented back links with part 66's 1" Rail 80/20 F #2. Also, attach its 1" 80 20 Panel Holder #1 facing back to part 121's 1" 80 20 Panel #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P123 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 68's 1" Rail 80/20 F #4, and attach its 1" 80 20 Panel Holder #1 facing back to part 121's 1" 80 20 Panel #3

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P124 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 68's 1" Rail 80/20 F #4, then connect its 1" 80 20 Panel Holder #1 oriented back links with part 121's 1" 80 20 Panel #1

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P125 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 74's 1" Rail 80/20 F #2, and attach its 1" 80 20 Panel Holder #1 facing back to part 126's 1" 80 20 Panel #4

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P127 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented back links with part 73's 1" Rail 80/20 F #4, also connect its 1" 80 20 Panel Holder #1 oriented back links with part 126's 1" 80 20 Panel #3

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P128 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented back links with part 74's 1" Rail 80/20 F #2. After that, attach its 1" 80 20 Panel Holder #1 facing back to part 126's 1" 80 20 Panel #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P129 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented back links with part 73's 1" Rail 80/20 F #4. Also, its 1" 80 20 Panel Holder #1, which is back-facing, should connect to part 126's 1" 80 20 Panel #1

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P130 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 51's 1" Rail 80/20 F #2, plus attach its 1" 80 20 Panel Holder #1 facing back to part 131's 1" 80 20 Panel #4

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P132 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 53's 1" Rail 80/20 F #4. After that, connect its 1" 80 20 Panel Holder #1 oriented back links with part 131's 1" 80 20 Panel #3

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P133 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 51's 1" Rail 80/20 F #2. After that, connect its 1" 80 20 Panel Holder #1 oriented back links with part 131's 1" 80 20 Panel #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P134 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented back links with part 53's 1" Rail 80/20 F #4, plus its 1" 80 20 Panel Holder #1, which is back-facing, should connect to part 131's 1" 80 20 Panel #1

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P135 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 55's 1" Rail 80/20 F #2. After that, connect its 1" 80 20 Panel Holder #1 oriented back links with part 136's 1" 80 20 Panel #4

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P137 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 55's 1" Rail 80/20 F #2, plus connect its 1" 80 20 Panel Holder #1 oriented back links with part 136's 1" 80 20 Panel #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P138 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented back links with part 56's 1" Rail 80/20 F #4, plus its 1" 80 20 Panel Holder #1, which is back-facing, should connect to part 136's 1" 80 20 Panel #3

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: back left

P139 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 56's 1" Rail 80/20 F #4. Next, attach its 1" 80 20 Panel Holder #1 facing back to part 136's 1" 80 20 Panel #1

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Hanger for Solid Panel Aluminum 80/20 - Angle: bottom right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Pull Handle Aluminum 80/20 - Angle: back left

P144 (1" Pull Handle Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 67's 1" Rail 80/20 F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Pull Handle Aluminum 80/20 - Angle: front right

P144 (1" Pull Handle Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 67's 1" Rail 80/20 F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Pull Handle Aluminum 80/20 - Angle: bottom right

P144 (1" Pull Handle Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 67's 1" Rail 80/20 F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Pull Handle Aluminum 80/20 - Angle: back left

P145 (1" Pull Handle Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 75's 1" Rail 80/20 F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Pull Handle Aluminum 80/20 - Angle: front right

P145 (1" Pull Handle Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 75's 1" Rail 80/20 F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Pull Handle Aluminum 80/20 - Angle: bottom right

P145 (1" Pull Handle Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 75's 1" Rail 80/20 F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Pull Handle Aluminum 80/20 - Angle: back left

P146 (1" Pull Handle Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 53's 1" Rail 80/20 F #4

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Pull Handle Aluminum 80/20 - Angle: front right

P146 (1" Pull Handle Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 53's 1" Rail 80/20 F #4

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Pull Handle Aluminum 80/20 - Angle: bottom right

P146 (1" Pull Handle Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 53's 1" Rail 80/20 F #4

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Pull Handle Aluminum 80/20 - Angle: back left

P147 (1" Pull Handle Aluminum 80/20) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 55's 1" Rail 80/20 F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Pull Handle Aluminum 80/20 - Angle: front right

P147 (1" Pull Handle Aluminum 80/20) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 55's 1" Rail 80/20 F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Part: 1" Pull Handle Aluminum 80/20 - Angle: bottom right

P147 (1" Pull Handle Aluminum 80/20) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 55's 1" Rail 80/20 F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Phase 3: Inter-Group Assembly

Attaching: Left Frame Wall

To construct the left side frame of the cabinet.

This completed wall will be connected to the Right Frame Wall and center divider in a later step.

Angle: back left

P1 (4" 1" T Slot Rail Aluminum 80/20 25.25" length) - its 1" 80/20 End Hole F #1, which is top-facing, should connect to part 150's 1" 80/20 End Hole M #1, also connect its 1" Rail 80/20 F #1 oriented left links with part 92's 1" Rail 80/20 M #1. Next, attach its 1" Rail 80/20 F #2 facing back to part 12's 1" Rail 80/20 M #1, plus attach its 1" Rail 80/20 F #3 facing right to part 27's 1" Rail 80/20 M #1. Next, attach its 1" Rail 80/20 F #4 facing front to part 140's 1" Rail 80/20 M #2. Also, its 1" 80/20 End Hole F #2 must be oriented bottom P4 (4" 1" T Slot Rail Aluminum 80/20 25.25" length) - attach its 1" 80/20 End Hole F #1 facing top to part 151's 1" 80/20 End Hole M #1. Also, its 1" Rail 80/20 F #1, which is left-facing, should connect to part 90's 1" Rail 80/20 M #1. Additionally, connect its 1" Rail 80/20 F #3 oriented right links with part 31's 1" Rail 80/20 M #1, also attach its 1" Rail 80/20 F #4 facing front to part 13's 1" Rail 80/20 M #1, also its 1" Rail 80/20 F #2 must be oriented back, then ensure its 1" 80/20 End Hole F #2 faces bottom P8 (4" 1" T Slot Rail Aluminum 80/20 11.5" length) - its 1" 80/20 End Hole F #1, which is back-facing, should connect to part 13's 1" 80/20 End Hole M #1, plus its 1" 80/20 End Hole F #2, which is front-facing, should connect to part 12's 1" 80/20 End Hole M #1, plus its 1" Rail 80/20 F #1 needs to point bottom. After that, its 1" Rail 80/20 F #2 should be directed right, then ensure its 1" Rail 80/20 F #3 faces top, then ensure its 1" Rail 80/20 F #4 faces left P10 (4" 1" T Slot Rail Aluminum 80/20 11.5" length) - connect its 1" 80/20 End Hole F #1 oriented front links with part 21's 1" 80/20 End Hole M #1. Additionally, attach its 1" 80/20 End Hole F #2 facing back to part 20's 1" 80/20 End Hole M #1, also its 1" Rail 80/20 F #1 should be directed top, then its 1" Rail 80/20 F #2 should be directed right, also its 1" Rail 80/20 F #3 should be directed bottom, then ensure its 1" Rail 80/20 F #4 faces left P44 (4" 1" T Slot Rail Aluminum 80/20 11.5" length) - its 1" 80/20 End Hole F #1, which is front-facing, should connect to part 46's 1" 80/20 End Hole M #1, plus its 1" 80/20 End Hole F #2, which is back-facing, should connect to part 45's 1" 80/20 End Hole M #1, plus its 1" Rail 80/20 F #1 needs to point top, and ensure its 1" Rail 80/20 F #2 faces right. Also, ensure its 1" Rail 80/20 F #3 faces bottom. Also, its 1" Rail 80/20 F #4 needs to point left P12 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is front-facing, should connect to part 1's 1" Rail 80/20 F #2. Next, connect its 1" 80/20 End Hole M #1 oriented back links with part 8's 1" 80/20 End Hole F #2 P13 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 4's 1" Rail 80/20 F #4, and connect its 1" 80/20 End Hole M #1 oriented front links with part 8's 1" 80/20 End Hole F #1 P20 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing back to part 4's 1" Rail 80/20 F #4, then connect its 1" 80/20 End Hole M #1 oriented front links with part 10's 1" 80/20 End Hole F #2 P21 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is front-facing, should connect to part 1's 1" Rail 80/20 F #2, and its 1" 80/20 End Hole M #1, which is back-facing, should connect to part 10's 1" 80/20 End Hole F #1 P45 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented back links with part 4's 1" Rail 80/20 F #4, plus connect its 1" 80/20 End Hole M #1 oriented front links with part 44's 1" 80/20 End Hole F #2 P46 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing front to part 1's 1" Rail 80/20 F #2, plus connect its 1" 80/20 End Hole M #1 oriented back links with part 44's 1" 80/20 End Hole F #1

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Angle: front right

Assembly of Left Frame Wall - front_right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Angle: bottom right

Assembly of Left Frame Wall - bottom_right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Attaching: Right Frame Wall

To construct the right side frame of the cabinet.

This completed wall will be connected to the Left Frame Wall and center divider in the next step.

Angle: back left

Assembly of Right Frame Wall - back_left

P3 (4" 1" T Slot Rail Aluminum 80/20 25.25" length) - its 1" 80/20 End Hole F #1, which is top-facing, should connect to part 148's 1" 80/20 End Hole M #1. Next, connect its 1" Rail 80/20 F #1 oriented left links with part 30's 1" Rail 80/20 M #1. Additionally, connect its 1" Rail 80/20 F #2 oriented back links with part 17's 1" Rail 80/20 M #1, also attach its 1" Rail 80/20 F #3 facing right to part 102's 1" Rail 80/20 M #1. Next, its 1" Rail 80/20 F #4, which is front-facing, should connect to part 142's 1" Rail 80/20 M #1, then its 1" 80/20 End Hole F #2 must be oriented bottom P6 (4" 1" T Slot Rail Aluminum 80/20 25.25" length) - its 1" 80/20 End Hole F #1, which is top-facing, should connect to part 153's 1" 80/20 End Hole M #1, then its 1" Rail 80/20 F #1, which is left-facing, should connect to part 34's 1" Rail 80/20 M #1. Also, attach its 1" Rail 80/20 F #3 facing right to part 100's 1" Rail 80/20 M #1. Next, attach its 1" Rail 80/20 F #4 facing front to part 16's 1" Rail 80/20 M #1. Also, its 1" Rail 80/20 F #2 should be directed back, also its 1" 80/20 End Hole F #2 must be oriented bottom P7 (4" 1" T Slot Rail Aluminum 80/20 11.5" length) - connect its 1" 80/20 End Hole F #1 oriented back links with part 16's 1" 80/20 End Hole M #1. Next, connect its 1" 80/20 End Hole F #2 oriented front links with part 17's 1" 80/20 End Hole M #1, also its 1" Rail 80/20 F #1 needs to point bottom. Also, its 1" Rail 80/20 F #2 should be directed right, and its 1" Rail 80/20 F #3 must be oriented top. After that, its 1" Rail 80/20 F #4 needs to point left P11 (4" 1" T Slot Rail Aluminum 80/20 11.5" length) - its 1" 80/20 End Hole F #1, which is front-facing, should connect to part 19's 1" 80/20 End Hole M #1. After that, its 1" 80/20 End Hole F #2, which is back-facing, should connect to part 18's 1" 80/20 End Hole M #1. Next, its 1" Rail 80/20 F #1 should be directed top. Additionally, ensure its 1" Rail 80/20 F #2 faces right, plus ensure its 1" Rail 80/20 F #3 faces bottom. Next, ensure its 1" Rail 80/20 F #4 faces left P22 (4" 1" T Slot Rail Aluminum 80/20 11.5" length) - its 1" 80/20 End Hole F #1, which is front-facing, should connect to part 49's 1" 80/20 End Hole M #1. Also, attach its 1" 80/20 End Hole F #2 facing back to part 50's 1" 80/20 End Hole M #1. Additionally, its 1" Rail 80/20 F #1 needs to point top, and its 1" Rail 80/20 F #2 must be oriented right. After that, its 1" Rail 80/20 F #3 should be directed bottom. After that, its 1" Rail 80/20 F #4 must be oriented left P16 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 6's 1" Rail 80/20 F #4, also attach its 1" 80/20 End Hole M #1 facing front to part 7's 1" 80/20 End Hole F #1 P17 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing front to part 3's 1" Rail 80/20 F #2. Also, its 1" 80/20 End Hole M #1, which is back-facing, should connect to part 7's 1" 80/20 End Hole F #2 P18 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 6's 1" Rail 80/20 F #4, then connect its 1" 80/20 End Hole M #1 oriented front links with part 11's 1" 80/20 End Hole F #2 P19 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented front links with part 3's 1" Rail 80/20 F #2. Additionally, connect its 1" 80/20 End Hole M #1 oriented back links with part 11's 1" 80/20 End Hole F #1 P49 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing front to part 3's 1" Rail 80/20 F #2. Also, connect its 1" 80/20 End Hole M #1 oriented back links with part 22's 1" 80/20 End Hole F #1 P50 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 6's 1" Rail 80/20 F #4, then attach its 1" 80/20 End Hole M #1 facing front to part 22's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Angle: front right

Assembly of Right Frame Wall - front_right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Angle: bottom right

Assembly of Right Frame Wall - bottom_right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 3

End Inside Joint Aluminum 80/20x 6

Attaching: Center Frame and Main Assembly

To build the central divider and connect it to the left and right walls to complete the cabinet skeleton.

With the main frame built, you will next install the fixed panels to clad the cabinet.

Angle: back left

Assembly of Center Frame and Main Assembly - back_left

P2 (4" 1" T Slot Rail Aluminum 80/20 25.25" length) - attach its 1" 80/20 End Hole F #1 facing top to part 149's 1" 80/20 End Hole M #1. Also, connect its 1" Rail 80/20 F #1 oriented left links with part 28's 1" Rail 80/20 M #1, also connect its 1" Rail 80/20 F #2 oriented back links with part 14's 1" Rail 80/20 M #1. After that, its 1" Rail 80/20 F #3, which is right-facing, should connect to part 29's 1" Rail 80/20 M #1. Next, its 1" Rail 80/20 F #4 should be directed front, and ensure its 1" 80/20 End Hole F #2 faces bottom P5 (4" 1" T Slot Rail Aluminum 80/20 25.25" length) - connect its 1" 80/20 End Hole F #1 oriented top links with part 152's 1" 80/20 End Hole M #1. After that, its 1" Rail 80/20 F #1, which is left-facing, should connect to part 32's 1" Rail 80/20 M #1. Next, connect its 1" Rail 80/20 F #3 oriented right links with part 35's 1" Rail 80/20 M #1, plus its 1" Rail 80/20 F #4, which is front-facing, should connect to part 15's 1" Rail 80/20 M #1, also its 1" Rail 80/20 F #2 must be oriented back, and its 1" 80/20 End Hole F #2 needs to point bottom P9 (4" 1" T Slot Rail Aluminum 80/20 11.5" length) - its 1" 80/20 End Hole F #1, which is front-facing, should connect to part 14's 1" 80/20 End Hole M #1. Additionally, attach its 1" 80/20 End Hole F #2 facing back to part 15's 1" 80/20 End Hole M #1, also its 1" Rail 80/20 F #1 should be directed bottom, plus its 1" Rail 80/20 F #2 must be oriented left, also its 1" Rail 80/20 F #3 needs to point top, and ensure its 1" Rail 80/20 F #4 faces right P14 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing front to part 2's 1" Rail 80/20 F #2. After that, attach its 1" 80/20 End Hole M #1 facing back to part 9's 1" 80/20 End Hole F #1 P15 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing back to part 5's 1" Rail 80/20 F #4. After that, connect its 1" 80/20 End Hole M #1 oriented front links with part 9's 1" 80/20 End Hole F #2 P24 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - attach its 1" 80/20 End Hole F #1 facing right to part 32's 1" 80/20 End Hole M #1. Additionally, connect its 1" Rail 80/20 F #2 oriented back links with part 118's 1" Rail 80/20 M #1. After that, attach its 1" 80/20 End Hole F #2 facing left to part 31's 1" 80/20 End Hole M #1, plus ensure its 1" Rail 80/20 F #1 faces top. Next, its 1" Rail 80/20 F #3 needs to point bottom. Next, ensure its 1" Rail 80/20 F #4 faces front P25 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - connect its 1" 80/20 End Hole F #1 oriented right links with part 28's 1" 80/20 End Hole M #1. Also, attach its 1" Rail 80/20 F #3 facing top to part 83's 1" Rail 80/20 M #1, also its 1" 80/20 End Hole F #2, which is left-facing, should connect to part 27's 1" 80/20 End Hole M #1. Next, its 1" Rail 80/20 F #1 needs to point bottom, also its 1" Rail 80/20 F #2 should be directed front. Next, its 1" Rail 80/20 F #4 must be oriented back P26 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - its 1" 80/20 End Hole F #1, which is right-facing, should connect to part 30's 1" 80/20 End Hole M #1. Also, its 1" Rail 80/20 F #3, which is top-facing, should connect to part 88's 1" Rail 80/20 M #1. After that, connect its 1" 80/20 End Hole F #2 oriented left links with part 29's 1" 80/20 End Hole M #1. Also, its 1" Rail 80/20 F #1 should be directed bottom. Next, its 1" Rail 80/20 F #2 must be oriented front. Also, its 1" Rail 80/20 F #4 should be directed back P33 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - attach its 1" 80/20 End Hole F #1 facing left to part 35's 1" 80/20 End Hole M #1, plus connect its 1" Rail 80/20 F #4 oriented back links with part 113's 1" Rail 80/20 M #1, plus attach its 1" 80/20 End Hole F #2 facing right to part 34's 1" 80/20 End Hole M #1, also its 1" Rail 80/20 F #1 must be oriented top. Additionally, its 1" Rail 80/20 F #2 needs to point front, also ensure its 1" Rail 80/20 F #3 faces bottom P36 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - connect its 1" 80/20 End Hole F #1 oriented right links with part 41's 1" 80/20 End Hole M #1. After that, connect its 1" Rail 80/20 F #3 oriented top links with part 85's 1" Rail 80/20 M #1, plus connect its 1" Rail 80/20 F #4 oriented back links with part 110's 1" Rail 80/20 M #1, then attach its 1" 80/20 End Hole F #2 facing left to part 40's 1" 80/20 End Hole M #1. Additionally, its 1" Rail 80/20 F #1 must be oriented bottom. After that, its 1" Rail 80/20 F #2 should be directed front P37 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - attach its 1" 80/20 End Hole F #1 facing right to part 39's 1" 80/20 End Hole M #1. Next, connect its 1" Rail 80/20 F #3 oriented top links with part 80's 1" Rail 80/20 M #1. Also, its 1" Rail 80/20 F #4, which is back-facing, should connect to part 115's 1" Rail 80/20 M #1. After that, its 1" 80/20 End Hole F #2, which is left-facing, should connect to part 38's 1" 80/20 End Hole M #1, plus ensure its 1" Rail 80/20 F #1 faces bottom, plus its 1" Rail 80/20 F #2 should be directed front P42 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - its 1" 80/20 End Hole F #1, which is left-facing, should connect to part 47's 1" 80/20 End Hole M #1. Additionally, attach its 1" Rail 80/20 F #1 facing top to part 76's 1" Rail 80/20 M #1, and attach its 1" 80/20 End Hole F #2 facing right to part 48's 1" 80/20 End Hole M #1. Next, its 1" Rail 80/20 F #2 should be directed front, plus its 1" Rail 80/20 F #3 needs to point bottom, and ensure its 1" Rail 80/20 F #4 faces back P27 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented left links with part 1's 1" Rail 80/20 F #3, plus connect its 1" 80/20 End Hole M #1 oriented right links with part 25's 1" 80/20 End Hole F #2 P28 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented right links with part 2's 1" Rail 80/20 F #1. After that, its 1" 80/20 End Hole M #1, which is left-facing, should connect to part 25's 1" 80/20 End Hole F #1 P29 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is left-facing, should connect to part 2's 1" Rail 80/20 F #3, and connect its 1" 80/20 End Hole M #1 oriented right links with part 26's 1" 80/20 End Hole F #2 P30 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is right-facing, should connect to part 3's 1" Rail 80/20 F #1. Next, attach its 1" 80/20 End Hole M #1 facing left to part 26's 1" 80/20 End Hole F #1 P31 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is left-facing, should connect to part 4's 1" Rail 80/20 F #3. Additionally, connect its 1" 80/20 End Hole M #1 oriented right links with part 24's 1" 80/20 End Hole F #2 P32 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing right to part 5's 1" Rail 80/20 F #1, and connect its 1" 80/20 End Hole M #1 oriented left links with part 24's 1" 80/20 End Hole F #1 P34 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is right-facing, should connect to part 6's 1" Rail 80/20 F #1, plus attach its 1" 80/20 End Hole M #1 facing left to part 33's 1" 80/20 End Hole F #2 P35 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing left to part 5's 1" Rail 80/20 F #3, plus its 1" 80/20 End Hole M #1, which is right-facing, should connect to part 33's 1" 80/20 End Hole F #1 P38 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented left links with part 4's 1" Rail 80/20 F #3, plus its 1" 80/20 End Hole M #1, which is right-facing, should connect to part 37's 1" 80/20 End Hole F #2 P39 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented right links with part 5's 1" Rail 80/20 F #1, plus its 1" 80/20 End Hole M #1, which is left-facing, should connect to part 37's 1" 80/20 End Hole F #1 P40 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing left to part 5's 1" Rail 80/20 F #3. Also, attach its 1" 80/20 End Hole M #1 facing right to part 36's 1" 80/20 End Hole F #2 P41 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented right links with part 6's 1" Rail 80/20 F #1. Additionally, attach its 1" 80/20 End Hole M #1 facing left to part 36's 1" 80/20 End Hole F #1 P47 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented left links with part 2's 1" Rail 80/20 F #3, and its 1" 80/20 End Hole M #1, which is right-facing, should connect to part 42's 1" 80/20 End Hole F #1 P48 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing right to part 3's 1" Rail 80/20 F #1. Also, connect its 1" 80/20 End Hole M #1 oriented left links with part 42's 1" 80/20 End Hole F #2

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Angle: front right

Assembly of Center Frame and Main Assembly - front_right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Angle: bottom right

Assembly of Center Frame and Main Assembly - bottom_right

80/20 1" T Slot Rail Aluminum 80/20 x 25.25"x 2

80/20 1" T Slot Rail Aluminum 80/20 x 11.5"x 1

End Inside Joint Aluminum 80/20x 16

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

Attaching: Fixed Panel Installation

To install all the fixed acrylic panels for the sides, back, and top of the cabinet.

After cladding the frame, you will assemble the four doors separately.

Angle: back left

Assembly of Fixed Panel Installation - back_left

P81 (1' Acrylic Panel 14.25" length) - attach its 1" 80 20 Panel #1 facing top to part 84's 1" 80 20 Panel Holder #1. Also, connect its 1" 80 20 Panel #2 oriented top links with part 82's 1" 80 20 Panel Holder #1. Next, attach its 1" 80 20 Panel #3 facing top to part 83's 1" 80 20 Panel Holder #1. Also, connect its 1" 80 20 Panel #4 oriented top links with part 80's 1" 80 20 Panel Holder #1 P86 (1' Acrylic Panel 14" length) - its 1" 80 20 Panel #1, which is top-facing, should connect to part 88's 1" 80 20 Panel Holder #1, also its 1" 80 20 Panel #2, which is top-facing, should connect to part 87's 1" 80 20 Panel Holder #1, and its 1" 80 20 Panel #3, which is top-facing, should connect to part 89's 1" 80 20 Panel Holder #1, also its 1" 80 20 Panel #4, which is top-facing, should connect to part 85's 1" 80 20 Panel Holder #1 P91 (1' Acrylic Panel 9.5" length) - connect its 1" 80 20 Panel #1 oriented left links with part 93's 1" 80 20 Panel Holder #1, then connect its 1" 80 20 Panel #2 oriented left links with part 94's 1" 80 20 Panel Holder #1. Next, attach its 1" 80 20 Panel #3 facing left to part 92's 1" 80 20 Panel Holder #1. Additionally, connect its 1" 80 20 Panel #4 oriented left links with part 90's 1" 80 20 Panel Holder #1 P96 (1' Acrylic Panel 14" length) - connect its 1" 80 20 Panel #1 oriented left links with part 99's 1" 80 20 Panel Holder #1, and its 1" 80 20 Panel #2, which is left-facing, should connect to part 98's 1" 80 20 Panel Holder #1. Next, its 1" 80 20 Panel #3, which is left-facing, should connect to part 97's 1" 80 20 Panel Holder #1. Also, attach its 1" 80 20 Panel #4 facing left to part 95's 1" 80 20 Panel Holder #1 P101 (1' Acrylic Panel 9.5" length) - connect its 1" 80 20 Panel #1 oriented right links with part 102's 1" 80 20 Panel Holder #1. Additionally, attach its 1" 80 20 Panel #2 facing right to part 100's 1" 80 20 Panel Holder #1. Also, connect its 1" 80 20 Panel #3 oriented right links with part 103's 1" 80 20 Panel Holder #1, then attach its 1" 80 20 Panel #4 facing right to part 104's 1" 80 20 Panel Holder #1 P106 (1' Acrylic Panel 14" length) - connect its 1" 80 20 Panel #1 oriented right links with part 109's 1" 80 20 Panel Holder #1. Also, connect its 1" 80 20 Panel #2 oriented right links with part 108's 1" 80 20 Panel Holder #1, and attach its 1" 80 20 Panel #3 facing right to part 107's 1" 80 20 Panel Holder #1. Next, attach its 1" 80 20 Panel #4 facing right to part 105's 1" 80 20 Panel Holder #1 P111 (2' Acrylic Panel 14" length) - its 1" 80 20 Panel #1, which is back-facing, should connect to part 113's 1" 80 20 Panel Holder #1. Next, connect its 1" 80 20 Panel #2 oriented back links with part 110's 1" 80 20 Panel Holder #1, also its 1" 80 20 Panel #3, which is back-facing, should connect to part 114's 1" 80 20 Panel Holder #1, also attach its 1" 80 20 Panel #4 facing back to part 112's 1" 80 20 Panel Holder #1 P116 (2' Acrylic Panel 14" length) - its 1" 80 20 Panel #1, which is back-facing, should connect to part 118's 1" 80 20 Panel Holder #1, and attach its 1" 80 20 Panel #2 facing back to part 115's 1" 80 20 Panel Holder #1. After that, connect its 1" 80 20 Panel #3 oriented back links with part 119's 1" 80 20 Panel Holder #1. Additionally, its 1" 80 20 Panel #4, which is back-facing, should connect to part 117's 1" 80 20 Panel Holder #1 P80 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented bottom links with part 37's 1" Rail 80/20 F #3. Also, connect its 1" 80 20 Panel Holder #1 oriented bottom links with part 81's 1" 80 20 Panel #4 P82 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented bottom links with part 37's 1" Rail 80/20 F #3. Also, its 1" 80 20 Panel Holder #1, which is bottom-facing, should connect to part 81's 1" 80 20 Panel #2 P83 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing bottom to part 25's 1" Rail 80/20 F #3. Additionally, connect its 1" 80 20 Panel Holder #1 oriented bottom links with part 81's 1" 80 20 Panel #3 P84 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented bottom links with part 25's 1" Rail 80/20 F #3. Additionally, attach its 1" 80 20 Panel Holder #1 facing bottom to part 81's 1" 80 20 Panel #1 P85 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing bottom to part 36's 1" Rail 80/20 F #3. After that, its 1" 80 20 Panel Holder #1, which is bottom-facing, should connect to part 86's 1" 80 20 Panel #4 P87 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is bottom-facing, should connect to part 36's 1" Rail 80/20 F #3, also its 1" 80 20 Panel Holder #1, which is bottom-facing, should connect to part 86's 1" 80 20 Panel #2 P88 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing bottom to part 26's 1" Rail 80/20 F #3. After that, its 1" 80 20 Panel Holder #1, which is bottom-facing, should connect to part 86's 1" 80 20 Panel #1 P89 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing bottom to part 26's 1" Rail 80/20 F #3, then attach its 1" 80 20 Panel Holder #1 facing bottom to part 86's 1" 80 20 Panel #3 P90 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing right to part 4's 1" Rail 80/20 F #1. After that, connect its 1" 80 20 Panel Holder #1 oriented right links with part 91's 1" 80 20 Panel #4 P92 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is right-facing, should connect to part 1's 1" Rail 80/20 F #1, plus its 1" 80 20 Panel Holder #1, which is right-facing, should connect to part 91's 1" 80 20 Panel #3 P93 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is right-facing, should connect to part 1's 1" Rail 80/20 F #1, and attach its 1" 80 20 Panel Holder #1 facing right to part 91's 1" 80 20 Panel #1 P94 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing right to part 4's 1" Rail 80/20 F #1. Next, attach its 1" 80 20 Panel Holder #1 facing right to part 91's 1" 80 20 Panel #2 P95 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is right-facing, should connect to part 4's 1" Rail 80/20 F #1. Also, connect its 1" 80 20 Panel Holder #1 oriented right links with part 96's 1" 80 20 Panel #4 P97 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented right links with part 1's 1" Rail 80/20 F #1. Also, attach its 1" 80 20 Panel Holder #1 facing right to part 96's 1" 80 20 Panel #3 P98 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented right links with part 4's 1" Rail 80/20 F #1, also attach its 1" 80 20 Panel Holder #1 facing right to part 96's 1" 80 20 Panel #2 P99 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is right-facing, should connect to part 1's 1" Rail 80/20 F #1. Additionally, attach its 1" 80 20 Panel Holder #1 facing right to part 96's 1" 80 20 Panel #1 P100 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented left links with part 6's 1" Rail 80/20 F #3, plus connect its 1" 80 20 Panel Holder #1 oriented left links with part 101's 1" 80 20 Panel #2 P102 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing left to part 3's 1" Rail 80/20 F #3. After that, its 1" 80 20 Panel Holder #1, which is left-facing, should connect to part 101's 1" 80 20 Panel #1 P103 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is left-facing, should connect to part 3's 1" Rail 80/20 F #3, then its 1" 80 20 Panel Holder #1, which is left-facing, should connect to part 101's 1" 80 20 Panel #3 P104 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is left-facing, should connect to part 6's 1" Rail 80/20 F #3, then connect its 1" 80 20 Panel Holder #1 oriented left links with part 101's 1" 80 20 Panel #4 P105 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is left-facing, should connect to part 3's 1" Rail 80/20 F #3, plus attach its 1" 80 20 Panel Holder #1 facing left to part 106's 1" 80 20 Panel #4 P107 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing left to part 6's 1" Rail 80/20 F #3. Additionally, attach its 1" 80 20 Panel Holder #1 facing left to part 106's 1" 80 20 Panel #3 P108 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented left links with part 3's 1" Rail 80/20 F #3. After that, attach its 1" 80 20 Panel Holder #1 facing left to part 106's 1" 80 20 Panel #2 P109 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented left links with part 6's 1" Rail 80/20 F #3, plus its 1" 80 20 Panel Holder #1, which is left-facing, should connect to part 106's 1" 80 20 Panel #1 P110 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing front to part 36's 1" Rail 80/20 F #4, plus connect its 1" 80 20 Panel Holder #1 oriented front links with part 111's 1" 80 20 Panel #2 P112 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is front-facing, should connect to part 36's 1" Rail 80/20 F #4, then attach its 1" 80 20 Panel Holder #1 facing front to part 111's 1" 80 20 Panel #4 P113 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing front to part 33's 1" Rail 80/20 F #4, and its 1" 80 20 Panel Holder #1, which is front-facing, should connect to part 111's 1" 80 20 Panel #1 P114 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented front links with part 33's 1" Rail 80/20 F #4, then connect its 1" 80 20 Panel Holder #1 oriented front links with part 111's 1" 80 20 Panel #3 P115 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing front to part 37's 1" Rail 80/20 F #4, plus connect its 1" 80 20 Panel Holder #1 oriented front links with part 116's 1" 80 20 Panel #2 P117 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented front links with part 37's 1" Rail 80/20 F #4. Additionally, connect its 1" 80 20 Panel Holder #1 oriented front links with part 116's 1" 80 20 Panel #4 P118 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing front to part 24's 1" Rail 80/20 F #2. Additionally, its 1" 80 20 Panel Holder #1, which is front-facing, should connect to part 116's 1" 80 20 Panel #1 P119 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is front-facing, should connect to part 24's 1" Rail 80/20 F #2. Also, its 1" 80 20 Panel Holder #1, which is front-facing, should connect to part 116's 1" 80 20 Panel #3

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Angle: front right

Assembly of Fixed Panel Installation - front_right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Angle: bottom right

Assembly of Fixed Panel Installation - bottom_right

1' Acrylic Panel x 14.25"x 1

1' Acrylic Panel x 14"x 3

1' Acrylic Panel x 9.5"x 2

2' Acrylic Panel x 14"x 2

1" Hanger for Solid Panel Aluminum 80/20x 32

Attaching: Door Assembly

To assemble the four doors, complete with frames, panels, and handles.

Mount the completed doors onto the main cabinet frame in the final step.

Angle: back left

P23 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - attach its 1" Rail 80/20 F #1 facing top to part 59's 1" Rail 80/20 M #1, then its 1" 80/20 End Hole F #1 should be directed right. Additionally, ensure its 1" Rail 80/20 F #2 faces back, also its 1" Rail 80/20 F #3 must be oriented bottom, and its 1" Rail 80/20 F #4 needs to point front, and its 1" 80/20 End Hole F #2 needs to point left P43 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - connect its 1" Rail 80/20 F #1 oriented top links with part 69's 1" Rail 80/20 M #1, and its 1" 80/20 End Hole F #1 should be directed left, also its 1" Rail 80/20 F #2 must be oriented front, plus its 1" Rail 80/20 F #3 must be oriented bottom. Additionally, its 1" Rail 80/20 F #4 needs to point back. Additionally, its 1" 80/20 End Hole F #2 should be directed right P51 (4" 1" T Slot Rail Aluminum 80/20 12.25" length) - connect its 1" 80/20 End Hole F #1 oriented top links with part 58's 1" 80/20 End Hole M #1, and connect its 1" Rail 80/20 F #2 oriented front links with part 130's 1" Rail 80/20 M #1. Next, its 1" 80/20 End Hole F #2, which is bottom-facing, should connect to part 59's 1" 80/20 End Hole M #1. Also, its 1" Rail 80/20 F #1 should be directed right. Additionally, ensure its 1" Rail 80/20 F #3 faces left. Also, its 1" Rail 80/20 F #4 needs to point back P52 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - its 1" Rail 80/20 F #1, which is bottom-facing, should connect to part 58's 1" Rail 80/20 M #1. After that, its 1" 80/20 End Hole F #1 should be directed right. Additionally, its 1" Rail 80/20 F #2 must be oriented front. Additionally, ensure its 1" Rail 80/20 F #3 faces top, also its 1" Rail 80/20 F #4 should be directed back, and its 1" 80/20 End Hole F #2 must be oriented left P53 (4" 1" T Slot Rail Aluminum 80/20 12.25" length) - attach its 1" 80/20 End Hole F #1 facing top to part 61's 1" 80/20 End Hole M #1. After that, attach its 1" Rail 80/20 F #4 facing front to part 132's 1" Rail 80/20 M #1, and connect its 1" 80/20 End Hole F #2 oriented bottom links with part 60's 1" 80/20 End Hole M #1. Also, ensure its 1" Rail 80/20 F #1 faces left, then ensure its 1" Rail 80/20 F #2 faces back. After that, its 1" Rail 80/20 F #3 should be directed right P54 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - connect its 1" Rail 80/20 F #1 oriented top links with part 63's 1" Rail 80/20 M #1. After that, ensure its 1" 80/20 End Hole F #1 faces right. Additionally, ensure its 1" Rail 80/20 F #2 faces back. Additionally, its 1" Rail 80/20 F #3 must be oriented bottom. Additionally, its 1" Rail 80/20 F #4 needs to point front. Next, its 1" 80/20 End Hole F #2 must be oriented left P55 (4" 1" T Slot Rail Aluminum 80/20 12.25" length) - attach its 1" 80/20 End Hole F #1 facing top to part 62's 1" 80/20 End Hole M #1, then its 1" Rail 80/20 F #2, which is front-facing, should connect to part 135's 1" Rail 80/20 M #1. After that, its 1" 80/20 End Hole F #2, which is bottom-facing, should connect to part 63's 1" 80/20 End Hole M #1. Also, its 1" Rail 80/20 F #1 needs to point right, and its 1" Rail 80/20 F #3 should be directed left. Also, its 1" Rail 80/20 F #4 needs to point back P56 (4" 1" T Slot Rail Aluminum 80/20 12.25" length) - connect its 1" 80/20 End Hole F #1 oriented top links with part 64's 1" 80/20 End Hole M #1. Next, attach its 1" Rail 80/20 F #4 facing front to part 138's 1" Rail 80/20 M #1. Additionally, its 1" 80/20 End Hole F #2, which is bottom-facing, should connect to part 65's 1" 80/20 End Hole M #1, and ensure its 1" Rail 80/20 F #1 faces left, then ensure its 1" Rail 80/20 F #2 faces back. Additionally, its 1" Rail 80/20 F #3 needs to point right P57 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - connect its 1" Rail 80/20 F #1 oriented bottom links with part 62's 1" Rail 80/20 M #1. Next, its 1" 80/20 End Hole F #1 must be oriented right. Next, its 1" Rail 80/20 F #2 needs to point front. After that, its 1" Rail 80/20 F #3 needs to point top, then ensure its 1" Rail 80/20 F #4 faces back. Also, its 1" 80/20 End Hole F #2 must be oriented left P66 (4" 1" T Slot Rail Aluminum 80/20 8" length) - its 1" 80/20 End Hole F #1, which is top-facing, should connect to part 71's 1" 80/20 End Hole M #1. Also, its 1" Rail 80/20 F #2, which is front-facing, should connect to part 120's 1" Rail 80/20 M #1. Also, its 1" 80/20 End Hole F #2, which is bottom-facing, should connect to part 69's 1" 80/20 End Hole M #1. Additionally, ensure its 1" Rail 80/20 F #1 faces right. Also, its 1" Rail 80/20 F #3 must be oriented left. Next, ensure its 1" Rail 80/20 F #4 faces back P67 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - connect its 1" Rail 80/20 F #1 oriented bottom links with part 71's 1" Rail 80/20 M #1. Also, connect its 1" Rail 80/20 F #2 oriented front links with part 144's 1" Rail 80/20 M #1, then its 1" 80/20 End Hole F #1 should be directed right. Additionally, ensure its 1" Rail 80/20 F #3 faces top. Also, ensure its 1" Rail 80/20 F #4 faces back. Also, its 1" 80/20 End Hole F #2 must be oriented left P68 (4" 1" T Slot Rail Aluminum 80/20 8" length) - its 1" 80/20 End Hole F #1, which is top-facing, should connect to part 72's 1" 80/20 End Hole M #1, then attach its 1" Rail 80/20 F #4 facing front to part 123's 1" Rail 80/20 M #1. Next, its 1" 80/20 End Hole F #2, which is bottom-facing, should connect to part 70's 1" 80/20 End Hole M #1. Additionally, its 1" Rail 80/20 F #1 needs to point left, and its 1" Rail 80/20 F #2 needs to point back. Additionally, its 1" Rail 80/20 F #3 must be oriented right P73 (4" 1" T Slot Rail Aluminum 80/20 8" length) - its 1" 80/20 End Hole F #1, which is top-facing, should connect to part 78's 1" 80/20 End Hole M #1, then its 1" Rail 80/20 F #4, which is front-facing, should connect to part 127's 1" Rail 80/20 M #1, and its 1" 80/20 End Hole F #2, which is bottom-facing, should connect to part 77's 1" 80/20 End Hole M #1. Also, its 1" Rail 80/20 F #1 should be directed left, plus its 1" Rail 80/20 F #2 needs to point back. Additionally, its 1" Rail 80/20 F #3 should be directed right P74 (4" 1" T Slot Rail Aluminum 80/20 8" length) - connect its 1" 80/20 End Hole F #1 oriented top links with part 79's 1" 80/20 End Hole M #1, plus connect its 1" Rail 80/20 F #2 oriented front links with part 125's 1" Rail 80/20 M #1, then its 1" 80/20 End Hole F #2, which is bottom-facing, should connect to part 76's 1" 80/20 End Hole M #1, then its 1" Rail 80/20 F #1 must be oriented right. Next, ensure its 1" Rail 80/20 F #3 faces left, and its 1" Rail 80/20 F #4 should be directed back P75 (4" 1" T Slot Rail Aluminum 80/20 13.5" length) - attach its 1" Rail 80/20 F #1 facing bottom to part 78's 1" Rail 80/20 M #1. Also, connect its 1" Rail 80/20 F #2 oriented front links with part 145's 1" Rail 80/20 M #1. Additionally, its 1" 80/20 End Hole F #1 should be directed right, then its 1" Rail 80/20 F #3 should be directed top. Additionally, its 1" Rail 80/20 F #4 should be directed back, and its 1" 80/20 End Hole F #2 should be directed left P58 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented top links with part 52's 1" Rail 80/20 F #1, and its 1" 80/20 End Hole M #1, which is bottom-facing, should connect to part 51's 1" 80/20 End Hole F #1 P59 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented bottom links with part 23's 1" Rail 80/20 F #1, also its 1" 80/20 End Hole M #1, which is top-facing, should connect to part 51's 1" 80/20 End Hole F #2 P60 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is bottom-facing, should connect to part 23's 1" Rail 80/20 F #1. Next, its 1" 80/20 End Hole M #1, which is top-facing, should connect to part 53's 1" 80/20 End Hole F #2 P61 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is top-facing, should connect to part 52's 1" Rail 80/20 F #1, also attach its 1" 80/20 End Hole M #1 facing bottom to part 53's 1" 80/20 End Hole F #1 P62 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing top to part 57's 1" Rail 80/20 F #1. Additionally, its 1" 80/20 End Hole M #1, which is bottom-facing, should connect to part 55's 1" 80/20 End Hole F #1 P63 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is bottom-facing, should connect to part 54's 1" Rail 80/20 F #1, also its 1" 80/20 End Hole M #1, which is top-facing, should connect to part 55's 1" 80/20 End Hole F #2 P64 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing top to part 57's 1" Rail 80/20 F #1, also attach its 1" 80/20 End Hole M #1 facing bottom to part 56's 1" 80/20 End Hole F #1 P65 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented bottom links with part 54's 1" Rail 80/20 F #1. After that, its 1" 80/20 End Hole M #1, which is top-facing, should connect to part 56's 1" 80/20 End Hole F #2 P69 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is bottom-facing, should connect to part 43's 1" Rail 80/20 F #1. Also, attach its 1" 80/20 End Hole M #1 facing top to part 66's 1" 80/20 End Hole F #2 P70 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented bottom links with part 43's 1" Rail 80/20 F #1, and its 1" 80/20 End Hole M #1, which is top-facing, should connect to part 68's 1" 80/20 End Hole F #2 P71 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing top to part 67's 1" Rail 80/20 F #1, and attach its 1" 80/20 End Hole M #1 facing bottom to part 66's 1" 80/20 End Hole F #1 P72 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is top-facing, should connect to part 67's 1" Rail 80/20 F #1. Next, its 1" 80/20 End Hole M #1, which is bottom-facing, should connect to part 68's 1" 80/20 End Hole F #1 P76 (End Inside Joint Aluminum) - its 1" Rail 80/20 M #1, which is bottom-facing, should connect to part 42's 1" Rail 80/20 F #1. Also, attach its 1" 80/20 End Hole M #1 facing top to part 74's 1" 80/20 End Hole F #2 P77 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented bottom links with part 42's 1" Rail 80/20 F #1, plus attach its 1" 80/20 End Hole M #1 facing top to part 73's 1" 80/20 End Hole F #2 P78 (End Inside Joint Aluminum) - connect its 1" Rail 80/20 M #1 oriented top links with part 75's 1" Rail 80/20 F #1, plus its 1" 80/20 End Hole M #1, which is bottom-facing, should connect to part 73's 1" 80/20 End Hole F #1 P79 (End Inside Joint Aluminum) - attach its 1" Rail 80/20 M #1 facing top to part 75's 1" Rail 80/20 F #1. Also, attach its 1" 80/20 End Hole M #1 facing bottom to part 74's 1" 80/20 End Hole F #1 P121 (1' Acrylic Panel 8.5" length) - its 1" 80 20 Panel #1, which is front-facing, should connect to part 124's 1" 80 20 Panel Holder #1, plus its 1" 80 20 Panel #2, which is front-facing, should connect to part 122's 1" 80 20 Panel Holder #1, then attach its 1" 80 20 Panel #3 facing front to part 123's 1" 80 20 Panel Holder #1, plus its 1" 80 20 Panel #4, which is front-facing, should connect to part 120's 1" 80 20 Panel Holder #1 P126 (1' Acrylic Panel 8.5" length) - attach its 1" 80 20 Panel #1 facing front to part 129's 1" 80 20 Panel Holder #1. Additionally, its 1" 80 20 Panel #2, which is front-facing, should connect to part 128's 1" 80 20 Panel Holder #1, then connect its 1" 80 20 Panel #3 oriented front links with part 127's 1" 80 20 Panel Holder #1. After that, attach its 1" 80 20 Panel #4 facing front to part 125's 1" 80 20 Panel Holder #1 P131 (1' Acrylic Panel 13" length) - attach its 1" 80 20 Panel #1 facing front to part 134's 1" 80 20 Panel Holder #1, also connect its 1" 80 20 Panel #2 oriented front links with part 133's 1" 80 20 Panel Holder #1. After that, attach its 1" 80 20 Panel #3 facing front to part 132's 1" 80 20 Panel Holder #1, plus connect its 1" 80 20 Panel #4 oriented front links with part 130's 1" 80 20 Panel Holder #1 P136 (1' Acrylic Panel 13" length) - attach its 1" 80 20 Panel #1 facing front to part 139's 1" 80 20 Panel Holder #1. Next, its 1" 80 20 Panel #2, which is front-facing, should connect to part 137's 1" 80 20 Panel Holder #1. Additionally, its 1" 80 20 Panel #3, which is front-facing, should connect to part 138's 1" 80 20 Panel Holder #1, also connect its 1" 80 20 Panel #4 oriented front links with part 135's 1" 80 20 Panel Holder #1 P120 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 66's 1" Rail 80/20 F #2, plus attach its 1" 80 20 Panel Holder #1 facing back to part 121's 1" 80 20 Panel #4 P122 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 66's 1" Rail 80/20 F #2. Also, connect its 1" 80 20 Panel Holder #1 oriented back links with part 121's 1" 80 20 Panel #2 P123 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 68's 1" Rail 80/20 F #4. After that, attach its 1" 80 20 Panel Holder #1 facing back to part 121's 1" 80 20 Panel #3 P124 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 68's 1" Rail 80/20 F #4. Next, its 1" 80 20 Panel Holder #1, which is back-facing, should connect to part 121's 1" 80 20 Panel #1 P125 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 74's 1" Rail 80/20 F #2, and its 1" 80 20 Panel Holder #1, which is back-facing, should connect to part 126's 1" 80 20 Panel #4 P127 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 73's 1" Rail 80/20 F #4, and its 1" 80 20 Panel Holder #1, which is back-facing, should connect to part 126's 1" 80 20 Panel #3 P128 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 74's 1" Rail 80/20 F #2, plus connect its 1" 80 20 Panel Holder #1 oriented back links with part 126's 1" 80 20 Panel #2 P129 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 73's 1" Rail 80/20 F #4, plus its 1" 80 20 Panel Holder #1, which is back-facing, should connect to part 126's 1" 80 20 Panel #1 P130 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 51's 1" Rail 80/20 F #2. After that, its 1" 80 20 Panel Holder #1, which is back-facing, should connect to part 131's 1" 80 20 Panel #4 P132 (1" Hanger for Solid Panel Aluminum 80/20) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 53's 1" Rail 80/20 F #4. Next, attach its 1" 80 20 Panel Holder #1 facing back to part 131's 1" 80 20 Panel #3 P133 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 51's 1" Rail 80/20 F #2, then connect its 1" 80 20 Panel Holder #1 oriented back links with part 131's 1" 80 20 Panel #2 P134 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 53's 1" Rail 80/20 F #4, plus connect its 1" 80 20 Panel Holder #1 oriented back links with part 131's 1" 80 20 Panel #1 P135 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 55's 1" Rail 80/20 F #2, also attach its 1" 80 20 Panel Holder #1 facing back to part 136's 1" 80 20 Panel #4 P137 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented back links with part 55's 1" Rail 80/20 F #2. Additionally, connect its 1" 80 20 Panel Holder #1 oriented back links with part 136's 1" 80 20 Panel #2 P138 (1" Hanger for Solid Panel Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 56's 1" Rail 80/20 F #4. After that, attach its 1" 80 20 Panel Holder #1 facing back to part 136's 1" 80 20 Panel #3 P139 (1" Hanger for Solid Panel Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented back links with part 56's 1" Rail 80/20 F #4, and attach its 1" 80 20 Panel Holder #1 facing back to part 136's 1" 80 20 Panel #1 P144 (1" Pull Handle Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 67's 1" Rail 80/20 F #2 P145 (1" Pull Handle Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented back links with part 75's 1" Rail 80/20 F #2 P146 (1" Pull Handle Aluminum 80/20) - its 1" Rail 80/20 M #1, which is back-facing, should connect to part 53's 1" Rail 80/20 F #4 P147 (1" Pull Handle Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 55's 1" Rail 80/20 F #2

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Angle: front right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Angle: bottom right

Assembly of Door Assembly - bottom_right

80/20 1" T Slot Rail Aluminum 80/20 x 13.5"x 7

80/20 1" T Slot Rail Aluminum 80/20 x 12.25"x 4

80/20 1" T Slot Rail Aluminum 80/20 x 8"x 4

End Inside Joint Aluminum 80/20x 16

1' Acrylic Panel x 8.5"x 2

1' Acrylic Panel x 13"x 2

1" Hanger for Solid Panel Aluminum 80/20x 16

1" Pull Handle Aluminum 80/20x 4

Attaching: Final Installation and Finishing

To mount the assembled doors onto the cabinet frame and add the final finishing touches.

The cabinet is now fully assembled.

Angle: back left

Assembly of Final Installation and Finishing - back_left

P140 (1" Rail Hinge Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 51's 1" Rail 80/20 F #2, and connect its 1" Rail 80/20 M #2 oriented back links with part 1's 1" Rail 80/20 F #4 P141 (1" Rail Hinge Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 51's 1" Rail 80/20 F #2, also attach its 1" Rail 80/20 M #2 facing back to part 1's 1" Rail 80/20 F #4 P142 (1" Rail Hinge Aluminum 80/20) - connect its 1" Rail 80/20 M #1 oriented back links with part 3's 1" Rail 80/20 F #4, plus attach its 1" Rail 80/20 M #2 facing back to part 56's 1" Rail 80/20 F #4 P143 (1" Rail Hinge Aluminum 80/20) - attach its 1" Rail 80/20 M #1 facing back to part 3's 1" Rail 80/20 F #4. Next, its 1" Rail 80/20 M #2, which is back-facing, should connect to part 56's 1" Rail 80/20 F #4 P148 (End Cap Aluminum) - its 1" 80/20 End Hole M #1, which is bottom-facing, should connect to part 3's 1" 80/20 End Hole F #1 P149 (End Cap Aluminum) - attach its 1" 80/20 End Hole M #1 facing bottom to part 2's 1" 80/20 End Hole F #1 P150 (End Cap Aluminum) - connect its 1" 80/20 End Hole M #1 oriented bottom links with part 1's 1" 80/20 End Hole F #1 P151 (End Cap Aluminum) - its 1" 80/20 End Hole M #1, which is bottom-facing, should connect to part 4's 1" 80/20 End Hole F #1 P152 (End Cap Aluminum) - attach its 1" 80/20 End Hole M #1 facing bottom to part 5's 1" 80/20 End Hole F #1 P153 (End Cap Aluminum) - its 1" 80/20 End Hole M #1, which is bottom-facing, should connect to part 6's 1" 80/20 End Hole F #1

1" Rail Hinge Aluminum 80/20x 4

End Cap Aluminum 80/20x 6

Angle: front right

Assembly of Final Installation and Finishing - front_right

1" Rail Hinge Aluminum 80/20x 4

End Cap Aluminum 80/20x 6

Angle: bottom right

Assembly of Final Installation and Finishing - bottom_right

1" Rail Hinge Aluminum 80/20x 4

End Cap Aluminum 80/20x 6