Rack Guitar - Comprehensive Assembly Plan And Visual Guide

A freestanding rack constructed from PVC pipes and fittings. It features two main vertical side frames (left and right) connected by three long horizontal tubes. The top section consists of a series of connected Tees and tubes forming multiple slots, likely for holding guitars or equipment, with short rear support tubes capped at the end. The base of each side frame forms a stable footing. - Guitar/Equipment Rack

Phase 1: Group Overview

Angle: back left

Right Frame Base and Vertical

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Left Frame Base and Vertical

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Frame Connecting Tubes

1" Tube x 42.08"x 3

Top Horizontal Structure Assembly

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Rear Support Bars and Caps

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Angle: front right

Right Frame Base and Vertical

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Left Frame Base and Vertical

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Frame Connecting Tubes

1" Tube x 42.08"x 3

Top Horizontal Structure Assembly

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Rear Support Bars and Caps

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Angle: bottom right

Right Frame Base and Vertical

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Left Frame Base and Vertical

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Frame Connecting Tubes

1" Tube x 42.08"x 3

Top Horizontal Structure Assembly

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Rear Support Bars and Caps

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Phase 2: Individual Group Assembly

Group: Right Frame Base and Vertical

Forms the foundational base and main upright support for the right side of the rack.

Connect the 1" Female SLIP of P7 (1" 90° Elbow) to the back-facing 1" Male SLIP of P4 (1" Tube 3" length). Connect the front-facing 1" Male SLIP of P4 to the back-facing 1" Female SLIP of P3 (1" Tee). Connect the front-facing 1" Female SLIP of P3 to the back-facing 1" Male SLIP of P1 (1" Tube 6" length). Connect the front-facing 1" Male SLIP of P1 to the back-facing 1" Female SLIP of P2 (1" Tee). Connect the front-facing 1" Female SLIP of P2 to the back-facing 1" Male SLIP of P5 (1" Tube 3" length). Connect the front-facing 1" Male SLIP of P5 to the back-facing 1" Female SLIP of P6 (1" Tee). Connect the front-facing 1" Female SLIP of P6 to the back-facing 1" Male SLIP of P8 (1" Tube 3" length). Connect the front-facing 1" Male SLIP of P8 to the back-facing 1" Female SLIP of P9 (1" 90° Elbow). Ensure P7 and P9 elbows face downwards. Connect the bottom 1" Male SLIP of P10 (1" Tube 15" length) to the top-facing 1" Female SLIP of P6 (Tee). Connect the bottom-facing 1" Female SLIP of P11 (1" Tee) to the top 1" Male SLIP of P10.

Part: 1" Tube x 6" - Angle: back left

P1 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented back links with part 2's 1" F SLIP #1. Additionally, connect its 1" M SLIP #2 oriented front links with part 3's 1" F SLIP #1

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tube x 6" - Angle: front right

P1 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented back links with part 2's 1" F SLIP #1. Additionally, connect its 1" M SLIP #2 oriented front links with part 3's 1" F SLIP #1

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tube x 6" - Angle: bottom right

P1 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented back links with part 2's 1" F SLIP #1. Additionally, connect its 1" M SLIP #2 oriented front links with part 3's 1" F SLIP #1

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: back left

P2 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented front links with part 1's 1" M SLIP #1. After that, its 1" F SLIP #2, which is back-facing, should connect to part 5's 1" M SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: front right

P2 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented front links with part 1's 1" M SLIP #1. After that, its 1" F SLIP #2, which is back-facing, should connect to part 5's 1" M SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: bottom right

P2 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented front links with part 1's 1" M SLIP #1. After that, its 1" F SLIP #2, which is back-facing, should connect to part 5's 1" M SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: back left

P3 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 1's 1" M SLIP #2. After that, its 1" F SLIP #2, which is front-facing, should connect to part 4's 1" M SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: front right

P3 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 1's 1" M SLIP #2. After that, its 1" F SLIP #2, which is front-facing, should connect to part 4's 1" M SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: bottom right

P3 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 1's 1" M SLIP #2. After that, its 1" F SLIP #2, which is front-facing, should connect to part 4's 1" M SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: back left

P4 (1" Tube 3" length) - its 1" M SLIP #1, which is front-facing, should connect to part 7's 1" F SLIP #1, plus connect its 1" M SLIP #2 oriented back links with part 3's 1" F SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: front right

P4 (1" Tube 3" length) - its 1" M SLIP #1, which is front-facing, should connect to part 7's 1" F SLIP #1, plus connect its 1" M SLIP #2 oriented back links with part 3's 1" F SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: bottom right

P4 (1" Tube 3" length) - its 1" M SLIP #1, which is front-facing, should connect to part 7's 1" F SLIP #1, plus connect its 1" M SLIP #2 oriented back links with part 3's 1" F SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: back left

P5 (1" Tube 3" length) - its 1" M SLIP #1, which is back-facing, should connect to part 6's 1" F SLIP #1. After that, its 1" M SLIP #2, which is front-facing, should connect to part 2's 1" F SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: front right

P5 (1" Tube 3" length) - its 1" M SLIP #1, which is back-facing, should connect to part 6's 1" F SLIP #1. After that, its 1" M SLIP #2, which is front-facing, should connect to part 2's 1" F SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: bottom right

P5 (1" Tube 3" length) - its 1" M SLIP #1, which is back-facing, should connect to part 6's 1" F SLIP #1. After that, its 1" M SLIP #2, which is front-facing, should connect to part 2's 1" F SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: back left

P6 (1" Tee F Slip PVC) - its 1" F SLIP #1, which is front-facing, should connect to part 5's 1" M SLIP #1, then connect its 1" F SLIP #2 oriented back links with part 8's 1" M SLIP #2, also its 1" F SLIP #3, which is top-facing, should connect to part 10's 1" M SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: front right

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: bottom right

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" 90° Elbow Slip PVC - Angle: back left

P7 (1" 90° Elbow Slip PVC ) - attach its 1" F SLIP #1 facing back to part 4's 1" M SLIP #1, plus its 1" F SLIP #2 must be oriented bottom

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" 90° Elbow Slip PVC - Angle: front right

P7 (1" 90° Elbow Slip PVC ) - attach its 1" F SLIP #1 facing back to part 4's 1" M SLIP #1, plus its 1" F SLIP #2 must be oriented bottom

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" 90° Elbow Slip PVC - Angle: bottom right

P7 (1" 90° Elbow Slip PVC ) - attach its 1" F SLIP #1 facing back to part 4's 1" M SLIP #1, plus its 1" F SLIP #2 must be oriented bottom

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: back left

P8 (1" Tube 3" length) - connect its 1" M SLIP #1 oriented back links with part 9's 1" F SLIP #1, plus its 1" M SLIP #2, which is front-facing, should connect to part 6's 1" F SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: front right

P8 (1" Tube 3" length) - connect its 1" M SLIP #1 oriented back links with part 9's 1" F SLIP #1, plus its 1" M SLIP #2, which is front-facing, should connect to part 6's 1" F SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: bottom right

P8 (1" Tube 3" length) - connect its 1" M SLIP #1 oriented back links with part 9's 1" F SLIP #1, plus its 1" M SLIP #2, which is front-facing, should connect to part 6's 1" F SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" 90° Elbow Slip PVC - Angle: back left

P9 (1" 90° Elbow Slip PVC ) - attach its 1" F SLIP #1 facing front to part 8's 1" M SLIP #1, and its 1" F SLIP #2 must be oriented bottom

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" 90° Elbow Slip PVC - Angle: front right

P9 (1" 90° Elbow Slip PVC ) - attach its 1" F SLIP #1 facing front to part 8's 1" M SLIP #1, and its 1" F SLIP #2 must be oriented bottom

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" 90° Elbow Slip PVC - Angle: bottom right

P9 (1" 90° Elbow Slip PVC ) - attach its 1" F SLIP #1 facing front to part 8's 1" M SLIP #1, and its 1" F SLIP #2 must be oriented bottom

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tube x 15" - Angle: back left

P10 (1" Tube 15" length) - connect its 1" M SLIP #1 oriented top links with part 11's 1" F SLIP #1. Next, attach its 1" M SLIP #2 facing bottom to part 6's 1" F SLIP #3

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tube x 15" - Angle: front right

P10 (1" Tube 15" length) - connect its 1" M SLIP #1 oriented top links with part 11's 1" F SLIP #1. Next, attach its 1" M SLIP #2 facing bottom to part 6's 1" F SLIP #3

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tube x 15" - Angle: bottom right

P10 (1" Tube 15" length) - connect its 1" M SLIP #1 oriented top links with part 11's 1" F SLIP #1. Next, attach its 1" M SLIP #2 facing bottom to part 6's 1" F SLIP #3

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: back left

P11 (1" Tee F Slip PVC) - attach its 1" F SLIP #1 facing bottom to part 10's 1" M SLIP #1

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: front right

P11 (1" Tee F Slip PVC) - attach its 1" F SLIP #1 facing bottom to part 10's 1" M SLIP #1

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: bottom right

P11 (1" Tee F Slip PVC) - attach its 1" F SLIP #1 facing bottom to part 10's 1" M SLIP #1

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Group: Left Frame Base and Vertical

Forms the foundational base and main upright support for the left side of the rack.

Connect the 1" Female SLIP of P35 (1" 90° Elbow) to the back-facing 1" Male SLIP of P34 (1" Tube 3" length). Connect the front-facing 1" Male SLIP of P34 to the back-facing 1" Female SLIP of P33 (1" Tee). Connect the front-facing 1" Female SLIP of P33 to the back-facing 1" Male SLIP of P52 (1" Tube 6" length). Connect the front-facing 1" Male SLIP of P52 to the back-facing 1" Female SLIP of P32 (1" Tee). Connect the front-facing 1" Female SLIP of P32 to the back-facing 1" Male SLIP of P31 (1" Tube 3" length). Connect the front-facing 1" Male SLIP of P31 to the back-facing 1" Female SLIP of P28 (1" Tee). Connect the front-facing 1" Female SLIP of P28 to the back-facing 1" Male SLIP of P29 (1" Tube 3" length). Connect the front-facing 1" Male SLIP of P29 to the back-facing 1" Female SLIP of P30 (1" 90° Elbow). Ensure P35 and P30 elbows face downwards. Connect the bottom 1" Male SLIP of P53 (1" Tube 15" length) to the top-facing 1" Female SLIP of P28 (Tee). Connect the bottom-facing 1" Female SLIP of P27 (1" Tee) to the top 1" Male SLIP of P53.

Part: 1" Tee Female Slip PVC - Angle: back left

P27 (1" Tee F Slip PVC) - attach its 1" F SLIP #2 facing bottom to part 53's 1" M SLIP #1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: front right

P27 (1" Tee F Slip PVC) - attach its 1" F SLIP #2 facing bottom to part 53's 1" M SLIP #1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: bottom right

P27 (1" Tee F Slip PVC) - attach its 1" F SLIP #2 facing bottom to part 53's 1" M SLIP #1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: back left

P28 (1" Tee F Slip PVC) - attach its 1" F SLIP #1 facing back to part 29's 1" M SLIP #2, and attach its 1" F SLIP #2 facing front to part 31's 1" M SLIP #2, and connect its 1" F SLIP #3 oriented top links with part 53's 1" M SLIP #2

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: front right

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: bottom right

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: back left

P29 (1" Tube 3" length) - its 1" M SLIP #1, which is back-facing, should connect to part 30's 1" F SLIP #1, and its 1" M SLIP #2, which is front-facing, should connect to part 28's 1" F SLIP #1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: front right

P29 (1" Tube 3" length) - its 1" M SLIP #1, which is back-facing, should connect to part 30's 1" F SLIP #1, and its 1" M SLIP #2, which is front-facing, should connect to part 28's 1" F SLIP #1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: bottom right

P29 (1" Tube 3" length) - its 1" M SLIP #1, which is back-facing, should connect to part 30's 1" F SLIP #1, and its 1" M SLIP #2, which is front-facing, should connect to part 28's 1" F SLIP #1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" 90° Elbow Slip PVC - Angle: back left

P30 (1" 90° Elbow Slip PVC ) - connect its 1" F SLIP #1 oriented front links with part 29's 1" M SLIP #1. Next, ensure its 1" F SLIP #2 faces bottom

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" 90° Elbow Slip PVC - Angle: front right

P30 (1" 90° Elbow Slip PVC ) - connect its 1" F SLIP #1 oriented front links with part 29's 1" M SLIP #1. Next, ensure its 1" F SLIP #2 faces bottom

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" 90° Elbow Slip PVC - Angle: bottom right

P30 (1" 90° Elbow Slip PVC ) - connect its 1" F SLIP #1 oriented front links with part 29's 1" M SLIP #1. Next, ensure its 1" F SLIP #2 faces bottom

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: back left

P31 (1" Tube 3" length) - attach its 1" M SLIP #1 facing front to part 32's 1" F SLIP #1, and attach its 1" M SLIP #2 facing back to part 28's 1" F SLIP #2

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: front right

P31 (1" Tube 3" length) - attach its 1" M SLIP #1 facing front to part 32's 1" F SLIP #1, and attach its 1" M SLIP #2 facing back to part 28's 1" F SLIP #2

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: bottom right

P31 (1" Tube 3" length) - attach its 1" M SLIP #1 facing front to part 32's 1" F SLIP #1, and attach its 1" M SLIP #2 facing back to part 28's 1" F SLIP #2

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: back left

P32 (1" Tee F Slip PVC) - its 1" F SLIP #1, which is back-facing, should connect to part 31's 1" M SLIP #1, also connect its 1" F SLIP #2 oriented front links with part 52's 1" M SLIP #2

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: front right

P32 (1" Tee F Slip PVC) - its 1" F SLIP #1, which is back-facing, should connect to part 31's 1" M SLIP #1, also connect its 1" F SLIP #2 oriented front links with part 52's 1" M SLIP #2

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: bottom right

P32 (1" Tee F Slip PVC) - its 1" F SLIP #1, which is back-facing, should connect to part 31's 1" M SLIP #1, also connect its 1" F SLIP #2 oriented front links with part 52's 1" M SLIP #2

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: back left

P33 (1" Tee F Slip PVC) - attach its 1" F SLIP #1 facing back to part 52's 1" M SLIP #1, plus attach its 1" F SLIP #2 facing front to part 34's 1" M SLIP #2

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: front right

P33 (1" Tee F Slip PVC) - attach its 1" F SLIP #1 facing back to part 52's 1" M SLIP #1, plus attach its 1" F SLIP #2 facing front to part 34's 1" M SLIP #2

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tee Female Slip PVC - Angle: bottom right

P33 (1" Tee F Slip PVC) - attach its 1" F SLIP #1 facing back to part 52's 1" M SLIP #1, plus attach its 1" F SLIP #2 facing front to part 34's 1" M SLIP #2

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: back left

P34 (1" Tube 3" length) - attach its 1" M SLIP #1 facing front to part 35's 1" F SLIP #1. After that, its 1" M SLIP #2, which is back-facing, should connect to part 33's 1" F SLIP #2

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: front right

P34 (1" Tube 3" length) - attach its 1" M SLIP #1 facing front to part 35's 1" F SLIP #1. After that, its 1" M SLIP #2, which is back-facing, should connect to part 33's 1" F SLIP #2

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tube x 3" - Angle: bottom right

P34 (1" Tube 3" length) - attach its 1" M SLIP #1 facing front to part 35's 1" F SLIP #1. After that, its 1" M SLIP #2, which is back-facing, should connect to part 33's 1" F SLIP #2

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" 90° Elbow Slip PVC - Angle: back left

P35 (1" 90° Elbow Slip PVC ) - its 1" F SLIP #1, which is back-facing, should connect to part 34's 1" M SLIP #1. After that, its 1" F SLIP #2 must be oriented bottom

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" 90° Elbow Slip PVC - Angle: front right

P35 (1" 90° Elbow Slip PVC ) - its 1" F SLIP #1, which is back-facing, should connect to part 34's 1" M SLIP #1. After that, its 1" F SLIP #2 must be oriented bottom

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" 90° Elbow Slip PVC - Angle: bottom right

P35 (1" 90° Elbow Slip PVC ) - its 1" F SLIP #1, which is back-facing, should connect to part 34's 1" M SLIP #1. After that, its 1" F SLIP #2 must be oriented bottom

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tube x 6" - Angle: back left

P52 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented front links with part 33's 1" F SLIP #1. Also, attach its 1" M SLIP #2 facing back to part 32's 1" F SLIP #2

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tube x 6" - Angle: front right

P52 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented front links with part 33's 1" F SLIP #1. Also, attach its 1" M SLIP #2 facing back to part 32's 1" F SLIP #2

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tube x 6" - Angle: bottom right

P52 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented front links with part 33's 1" F SLIP #1. Also, attach its 1" M SLIP #2 facing back to part 32's 1" F SLIP #2

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tube x 15" - Angle: back left

P53 (1" Tube 15" length) - its 1" M SLIP #1, which is top-facing, should connect to part 27's 1" F SLIP #2, and connect its 1" M SLIP #2 oriented bottom links with part 28's 1" F SLIP #3

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tube x 15" - Angle: front right

P53 (1" Tube 15" length) - its 1" M SLIP #1, which is top-facing, should connect to part 27's 1" F SLIP #2, and connect its 1" M SLIP #2 oriented bottom links with part 28's 1" F SLIP #3

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Part: 1" Tube x 15" - Angle: bottom right

P53 (1" Tube 15" length) - its 1" M SLIP #1, which is top-facing, should connect to part 27's 1" F SLIP #2, and connect its 1" M SLIP #2 oriented bottom links with part 28's 1" F SLIP #3

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Group: Top Horizontal Structure Assembly

Forms the upper rack section where equipment/guitars are held.

Assemble the horizontal top bar: Connect P12(1" 90° Elbow) to P13(1" Tube 3" length). Connect P13 to P14(1" Tee). Connect P14 to P15(1" Tube 5.5" length). Connect P15 to P16(1" Tee). Connect P16 to P17(1" Tube 5.4" length). Connect P17 to P18(1" Tee). Connect P18 to P19(1" Tube 5.5" length). Connect P19 to P20(1" Tee). Connect P20 to P21(1" Tube 5.5" length). Connect P21 to P22(1" Tee). Connect P22 to P23(1" Tube 5.5" length). Connect P23 to P24(1" Tee). Connect P24 to P25(1" Tube 3" length). Connect P25 to P26(1" 90° Elbow). Ensure all Tees (P14, P16, P18, P20, P22, P24) have their third opening facing towards the back.

Part: 1" 90° Elbow Slip PVC - Angle: back left

Top Horizontal Structure Assembly - Part 1

P12 (1" 90° Elbow Slip PVC ) - attach its 1" F SLIP #1 facing bottom to part 51's 1" M SLIP #1, also attach its 1" F SLIP #2 facing right to part 13's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" 90° Elbow Slip PVC - Angle: front right

P12 (1" 90° Elbow Slip PVC ) - attach its 1" F SLIP #1 facing bottom to part 51's 1" M SLIP #1, also attach its 1" F SLIP #2 facing right to part 13's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" 90° Elbow Slip PVC - Angle: bottom right

P12 (1" 90° Elbow Slip PVC ) - attach its 1" F SLIP #1 facing bottom to part 51's 1" M SLIP #1, also attach its 1" F SLIP #2 facing right to part 13's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 3" - Angle: back left

P13 (1" Tube 3" length) - its 1" M SLIP #1, which is right-facing, should connect to part 14's 1" F SLIP #1, and attach its 1" M SLIP #2 facing left to part 12's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 3" - Angle: front right

P13 (1" Tube 3" length) - its 1" M SLIP #1, which is right-facing, should connect to part 14's 1" F SLIP #1, and attach its 1" M SLIP #2 facing left to part 12's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 3" - Angle: bottom right

P13 (1" Tube 3" length) - its 1" M SLIP #1, which is right-facing, should connect to part 14's 1" F SLIP #1, and attach its 1" M SLIP #2 facing left to part 12's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: back left

P14 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented left links with part 13's 1" M SLIP #1, also connect its 1" F SLIP #2 oriented right links with part 15's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: front right

P14 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented left links with part 13's 1" M SLIP #1, also connect its 1" F SLIP #2 oriented right links with part 15's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: bottom right

P14 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented left links with part 13's 1" M SLIP #1, also connect its 1" F SLIP #2 oriented right links with part 15's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 5.5" - Angle: back left

P15 (1" Tube 5.5" length) - attach its 1" M SLIP #1 facing right to part 16's 1" F SLIP #1. Also, connect its 1" M SLIP #2 oriented left links with part 14's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 5.5" - Angle: front right

P15 (1" Tube 5.5" length) - attach its 1" M SLIP #1 facing right to part 16's 1" F SLIP #1. Also, connect its 1" M SLIP #2 oriented left links with part 14's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 5.5" - Angle: bottom right

P15 (1" Tube 5.5" length) - attach its 1" M SLIP #1 facing right to part 16's 1" F SLIP #1. Also, connect its 1" M SLIP #2 oriented left links with part 14's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: back left

P16 (1" Tee F Slip PVC) - its 1" F SLIP #1, which is left-facing, should connect to part 15's 1" M SLIP #1. Next, its 1" F SLIP #2, which is right-facing, should connect to part 17's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: front right

P16 (1" Tee F Slip PVC) - its 1" F SLIP #1, which is left-facing, should connect to part 15's 1" M SLIP #1. Next, its 1" F SLIP #2, which is right-facing, should connect to part 17's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: bottom right

P16 (1" Tee F Slip PVC) - its 1" F SLIP #1, which is left-facing, should connect to part 15's 1" M SLIP #1. Next, its 1" F SLIP #2, which is right-facing, should connect to part 17's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 5.4" - Angle: back left

P17 (1" Tube 5.4" length) - connect its 1" M SLIP #1 oriented right links with part 18's 1" F SLIP #1, then its 1" M SLIP #2, which is left-facing, should connect to part 16's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 5.4" - Angle: front right

P17 (1" Tube 5.4" length) - connect its 1" M SLIP #1 oriented right links with part 18's 1" F SLIP #1, then its 1" M SLIP #2, which is left-facing, should connect to part 16's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 5.4" - Angle: bottom right

P17 (1" Tube 5.4" length) - connect its 1" M SLIP #1 oriented right links with part 18's 1" F SLIP #1, then its 1" M SLIP #2, which is left-facing, should connect to part 16's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: back left

P18 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented left links with part 17's 1" M SLIP #1, also its 1" F SLIP #2, which is right-facing, should connect to part 19's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: front right

P18 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented left links with part 17's 1" M SLIP #1, also its 1" F SLIP #2, which is right-facing, should connect to part 19's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: bottom right

P18 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented left links with part 17's 1" M SLIP #1, also its 1" F SLIP #2, which is right-facing, should connect to part 19's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 5.5" - Angle: back left

P19 (1" Tube 5.5" length) - connect its 1" M SLIP #1 oriented right links with part 20's 1" F SLIP #1. Next, its 1" M SLIP #2, which is left-facing, should connect to part 18's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 5.5" - Angle: front right

P19 (1" Tube 5.5" length) - connect its 1" M SLIP #1 oriented right links with part 20's 1" F SLIP #1. Next, its 1" M SLIP #2, which is left-facing, should connect to part 18's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 5.5" - Angle: bottom right

P19 (1" Tube 5.5" length) - connect its 1" M SLIP #1 oriented right links with part 20's 1" F SLIP #1. Next, its 1" M SLIP #2, which is left-facing, should connect to part 18's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: back left

P20 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented left links with part 19's 1" M SLIP #1. Additionally, its 1" F SLIP #2, which is right-facing, should connect to part 21's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: front right

P20 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented left links with part 19's 1" M SLIP #1. Additionally, its 1" F SLIP #2, which is right-facing, should connect to part 21's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: bottom right

P20 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented left links with part 19's 1" M SLIP #1. Additionally, its 1" F SLIP #2, which is right-facing, should connect to part 21's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 5.5" - Angle: back left

P21 (1" Tube 5.5" length) - attach its 1" M SLIP #1 facing right to part 22's 1" F SLIP #1. Also, connect its 1" M SLIP #2 oriented left links with part 20's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 5.5" - Angle: front right

P21 (1" Tube 5.5" length) - attach its 1" M SLIP #1 facing right to part 22's 1" F SLIP #1. Also, connect its 1" M SLIP #2 oriented left links with part 20's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 5.5" - Angle: bottom right

P21 (1" Tube 5.5" length) - attach its 1" M SLIP #1 facing right to part 22's 1" F SLIP #1. Also, connect its 1" M SLIP #2 oriented left links with part 20's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: back left

P22 (1" Tee F Slip PVC) - its 1" F SLIP #1, which is left-facing, should connect to part 21's 1" M SLIP #1. Also, attach its 1" F SLIP #2 facing right to part 23's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: front right

P22 (1" Tee F Slip PVC) - its 1" F SLIP #1, which is left-facing, should connect to part 21's 1" M SLIP #1. Also, attach its 1" F SLIP #2 facing right to part 23's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: bottom right

P22 (1" Tee F Slip PVC) - its 1" F SLIP #1, which is left-facing, should connect to part 21's 1" M SLIP #1. Also, attach its 1" F SLIP #2 facing right to part 23's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 5.5" - Angle: back left

P23 (1" Tube 5.5" length) - its 1" M SLIP #1, which is right-facing, should connect to part 24's 1" F SLIP #1, plus its 1" M SLIP #2, which is left-facing, should connect to part 22's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 5.5" - Angle: front right

P23 (1" Tube 5.5" length) - its 1" M SLIP #1, which is right-facing, should connect to part 24's 1" F SLIP #1, plus its 1" M SLIP #2, which is left-facing, should connect to part 22's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 5.5" - Angle: bottom right

P23 (1" Tube 5.5" length) - its 1" M SLIP #1, which is right-facing, should connect to part 24's 1" F SLIP #1, plus its 1" M SLIP #2, which is left-facing, should connect to part 22's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: back left

P24 (1" Tee F Slip PVC) - its 1" F SLIP #1, which is left-facing, should connect to part 23's 1" M SLIP #1, plus its 1" F SLIP #2, which is right-facing, should connect to part 25's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: front right

P24 (1" Tee F Slip PVC) - its 1" F SLIP #1, which is left-facing, should connect to part 23's 1" M SLIP #1, plus its 1" F SLIP #2, which is right-facing, should connect to part 25's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tee Female Slip PVC - Angle: bottom right

P24 (1" Tee F Slip PVC) - its 1" F SLIP #1, which is left-facing, should connect to part 23's 1" M SLIP #1, plus its 1" F SLIP #2, which is right-facing, should connect to part 25's 1" M SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 3" - Angle: back left

P25 (1" Tube 3" length) - attach its 1" M SLIP #1 facing right to part 26's 1" F SLIP #1, and connect its 1" M SLIP #2 oriented left links with part 24's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 3" - Angle: front right

P25 (1" Tube 3" length) - attach its 1" M SLIP #1 facing right to part 26's 1" F SLIP #1, and connect its 1" M SLIP #2 oriented left links with part 24's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 3" - Angle: bottom right

P25 (1" Tube 3" length) - attach its 1" M SLIP #1 facing right to part 26's 1" F SLIP #1, and connect its 1" M SLIP #2 oriented left links with part 24's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" 90° Elbow Slip PVC - Angle: back left

P26 (1" 90° Elbow Slip PVC ) - its 1" F SLIP #1, which is left-facing, should connect to part 25's 1" M SLIP #1. Also, attach its 1" F SLIP #2 facing bottom to part 54's 1" M SLIP #1

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" 90° Elbow Slip PVC - Angle: front right

P26 (1" 90° Elbow Slip PVC ) - its 1" F SLIP #1, which is left-facing, should connect to part 25's 1" M SLIP #1. Also, attach its 1" F SLIP #2 facing bottom to part 54's 1" M SLIP #1

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" 90° Elbow Slip PVC - Angle: bottom right

P26 (1" 90° Elbow Slip PVC ) - its 1" F SLIP #1, which is left-facing, should connect to part 25's 1" M SLIP #1. Also, attach its 1" F SLIP #2 facing bottom to part 54's 1" M SLIP #1

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 8.98" - Angle: back left

P51 (1" Tube 8.98" length) - connect its 1" M SLIP #1 oriented top links with part 12's 1" F SLIP #1

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 8.98" - Angle: front right

P51 (1" Tube 8.98" length) - connect its 1" M SLIP #1 oriented top links with part 12's 1" F SLIP #1

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 8.98" - Angle: bottom right

P51 (1" Tube 8.98" length) - connect its 1" M SLIP #1 oriented top links with part 12's 1" F SLIP #1

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 9" - Angle: back left

P54 (1" Tube 9" length) - attach its 1" M SLIP #1 facing top to part 26's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 9" - Angle: front right

P54 (1" Tube 9" length) - attach its 1" M SLIP #1 facing top to part 26's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Part: 1" Tube x 9" - Angle: bottom right

P54 (1" Tube 9" length) - attach its 1" M SLIP #1 facing top to part 26's 1" F SLIP #2

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Group: Rear Support Bars and Caps

Provides rear support or stops for items placed in the top rack structure.

Connect the front-facing 1" Male SLIP of P38 (1" Tube 6" length) to the back-facing 1" Female SLIP of P14 (Tee). Connect the front-facing 1" Male SLIP of P39 (1" Tube 6" length) to the back-facing 1" Female SLIP of P16 (Tee). Connect the front-facing 1" Male SLIP of P40 (1" Tube 6" length) to the back-facing 1" Female SLIP of P18 (Tee). Connect the front-facing 1" Male SLIP of P41 (1" Tube 6" length) to the back-facing 1" Female SLIP of P20 (Tee). Connect the front-facing 1" Male SLIP of P42 (1" Tube 6" length) to the back-facing 1" Female SLIP of P22 (Tee). Connect the front-facing 1" Male SLIP of P43 (1" Tube 6" length) to the back-facing 1" Female SLIP of P24 (Tee). Attach P49 (1" Cap) to the back 1" Male SLIP of P38. Attach P48 (1" Cap) to the back 1" Male SLIP of P39. Attach P47 (1" Cap) to the back 1" Male SLIP of P40. Attach P46 (1" Cap) to the back 1" Male SLIP of P41. Attach P45 (1" Cap) to the back 1" Male SLIP of P42. Attach P44 (1" Cap) to the back 1" Male SLIP of P43.

Part: 1" Tube x 6" - Angle: back left

P38 (1" Tube 6" length) - attach its 1" M SLIP #1 facing front to part 49's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: front right

P38 (1" Tube 6" length) - attach its 1" M SLIP #1 facing front to part 49's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: bottom right

P38 (1" Tube 6" length) - attach its 1" M SLIP #1 facing front to part 49's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: back left

P39 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented front links with part 48's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: front right

P39 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented front links with part 48's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: bottom right

P39 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented front links with part 48's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: back left

P40 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented front links with part 47's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: front right

P40 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented front links with part 47's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: bottom right

P40 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented front links with part 47's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: back left

P41 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented front links with part 46's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: front right

P41 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented front links with part 46's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: bottom right

P41 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented front links with part 46's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: back left

P42 (1" Tube 6" length) - its 1" M SLIP #1, which is front-facing, should connect to part 45's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: front right

P42 (1" Tube 6" length) - its 1" M SLIP #1, which is front-facing, should connect to part 45's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: bottom right

P42 (1" Tube 6" length) - its 1" M SLIP #1, which is front-facing, should connect to part 45's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: back left

P43 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented front links with part 44's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: front right

P43 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented front links with part 44's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Tube x 6" - Angle: bottom right

P43 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented front links with part 44's 1" F SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: back left

P44 (1" Cap Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 43's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: front right

P44 (1" Cap Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 43's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: bottom right

P44 (1" Cap Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 43's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: back left

P45 (1" Cap Slip PVC) - attach its 1" F SLIP #1 facing back to part 42's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: front right

P45 (1" Cap Slip PVC) - attach its 1" F SLIP #1 facing back to part 42's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: bottom right

P45 (1" Cap Slip PVC) - attach its 1" F SLIP #1 facing back to part 42's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: back left

P46 (1" Cap Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 41's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: front right

P46 (1" Cap Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 41's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: bottom right

P46 (1" Cap Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 41's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: back left

P47 (1" Cap Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 40's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: front right

P47 (1" Cap Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 40's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: bottom right

P47 (1" Cap Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 40's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: back left

P48 (1" Cap Slip PVC) - its 1" F SLIP #1, which is back-facing, should connect to part 39's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: front right

P48 (1" Cap Slip PVC) - its 1" F SLIP #1, which is back-facing, should connect to part 39's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: bottom right

P48 (1" Cap Slip PVC) - its 1" F SLIP #1, which is back-facing, should connect to part 39's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: back left

P49 (1" Cap Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 38's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: front right

P49 (1" Cap Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 38's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Part: 1" Cap Slip PVC - Angle: bottom right

P49 (1" Cap Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 38's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Phase 3: Inter-Group Assembly

Attaching: Right Frame Base and Vertical

Forms the foundational base and main upright support for the right side of the rack.

This frame will be connected to the Left Frame using horizontal tubes (Group 3). The top Tee (P11) will later connect to the Top Horizontal Structure (Group 4) via P51.

Angle: back left

Assembly of Right Frame Base and Vertical - back_left

P1 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented back links with part 2's 1" F SLIP #1, and its 1" M SLIP #2, which is front-facing, should connect to part 3's 1" F SLIP #1 P2 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented front links with part 1's 1" M SLIP #1. Also, connect its 1" F SLIP #2 oriented back links with part 5's 1" M SLIP #2, then connect its 1" F SLIP #3 oriented right links with part 36's 1" M SLIP #1 P3 (1" Tee F Slip PVC) - attach its 1" F SLIP #1 facing back to part 1's 1" M SLIP #2. After that, its 1" F SLIP #2, which is front-facing, should connect to part 4's 1" M SLIP #2, and connect its 1" F SLIP #3 oriented right links with part 37's 1" M SLIP #1 P4 (1" Tube 3" length) - its 1" M SLIP #1, which is front-facing, should connect to part 7's 1" F SLIP #1. Next, connect its 1" M SLIP #2 oriented back links with part 3's 1" F SLIP #2 P5 (1" Tube 3" length) - connect its 1" M SLIP #1 oriented back links with part 6's 1" F SLIP #1, and its 1" M SLIP #2, which is front-facing, should connect to part 2's 1" F SLIP #2 P6 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented front links with part 5's 1" M SLIP #1. After that, connect its 1" F SLIP #2 oriented back links with part 8's 1" M SLIP #2, and connect its 1" F SLIP #3 oriented top links with part 10's 1" M SLIP #2 P7 (1" 90° Elbow Slip PVC ) - connect its 1" F SLIP #1 oriented back links with part 4's 1" M SLIP #1, also its 1" F SLIP #2 needs to point bottom P8 (1" Tube 3" length) - attach its 1" M SLIP #1 facing back to part 9's 1" F SLIP #1. Additionally, attach its 1" M SLIP #2 facing front to part 6's 1" F SLIP #2 P9 (1" 90° Elbow Slip PVC ) - its 1" F SLIP #1, which is front-facing, should connect to part 8's 1" M SLIP #1, then its 1" F SLIP #2 should be directed bottom P10 (1" Tube 15" length) - connect its 1" M SLIP #1 oriented top links with part 11's 1" F SLIP #1. Additionally, its 1" M SLIP #2, which is bottom-facing, should connect to part 6's 1" F SLIP #3 P11 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented bottom links with part 10's 1" M SLIP #1, also attach its 1" F SLIP #2 facing top to part 51's 1" M SLIP #2, then attach its 1" F SLIP #3 facing right to part 50's 1" M SLIP #2

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Angle: front right

Assembly of Right Frame Base and Vertical - front_right

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Angle: bottom right

Assembly of Right Frame Base and Vertical - bottom_right

1" Tube x 6"x 1

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 15"x 1

Attaching: Left Frame Base and Vertical

Forms the foundational base and main upright support for the left side of the rack.

This frame will be connected to the Right Frame using horizontal tubes (Group 3). The top Tee (P27) will later connect to the Top Horizontal Structure (Group 4) via P54.

Angle: back left

Assembly of Left Frame Base and Vertical - back_left

P27 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented top links with part 54's 1" M SLIP #2. Also, attach its 1" F SLIP #2 facing bottom to part 53's 1" M SLIP #1, then connect its 1" F SLIP #3 oriented left links with part 50's 1" M SLIP #1 P28 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 29's 1" M SLIP #2, then attach its 1" F SLIP #2 facing front to part 31's 1" M SLIP #2, and attach its 1" F SLIP #3 facing top to part 53's 1" M SLIP #2 P29 (1" Tube 3" length) - attach its 1" M SLIP #1 facing back to part 30's 1" F SLIP #1. Additionally, attach its 1" M SLIP #2 facing front to part 28's 1" F SLIP #1 P30 (1" 90° Elbow Slip PVC ) - its 1" F SLIP #1, which is front-facing, should connect to part 29's 1" M SLIP #1, and its 1" F SLIP #2 needs to point bottom P31 (1" Tube 3" length) - connect its 1" M SLIP #1 oriented front links with part 32's 1" F SLIP #1, plus its 1" M SLIP #2, which is back-facing, should connect to part 28's 1" F SLIP #2 P32 (1" Tee F Slip PVC) - its 1" F SLIP #1, which is back-facing, should connect to part 31's 1" M SLIP #1, and connect its 1" F SLIP #2 oriented front links with part 52's 1" M SLIP #2, plus connect its 1" F SLIP #3 oriented left links with part 36's 1" M SLIP #2 P33 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 52's 1" M SLIP #1. After that, attach its 1" F SLIP #2 facing front to part 34's 1" M SLIP #2. Additionally, connect its 1" F SLIP #3 oriented left links with part 37's 1" M SLIP #2 P34 (1" Tube 3" length) - connect its 1" M SLIP #1 oriented front links with part 35's 1" F SLIP #1, plus connect its 1" M SLIP #2 oriented back links with part 33's 1" F SLIP #2 P35 (1" 90° Elbow Slip PVC ) - connect its 1" F SLIP #1 oriented back links with part 34's 1" M SLIP #1. Additionally, its 1" F SLIP #2 must be oriented bottom P52 (1" Tube 6" length) - attach its 1" M SLIP #1 facing front to part 33's 1" F SLIP #1. Additionally, connect its 1" M SLIP #2 oriented back links with part 32's 1" F SLIP #2 P53 (1" Tube 15" length) - its 1" M SLIP #1, which is top-facing, should connect to part 27's 1" F SLIP #2, also connect its 1" M SLIP #2 oriented bottom links with part 28's 1" F SLIP #3

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Angle: front right

Assembly of Left Frame Base and Vertical - front_right

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Angle: bottom right

Assembly of Left Frame Base and Vertical - bottom_right

1" Tee Female Slip PVCx 4

1" Tube x 3"x 3

1" 90° Elbow Slip PVC x 2

1" Tube x 6"x 1

1" Tube x 15"x 1

Attaching: Frame Connecting Tubes

Connects the Left and Right Frames together to form the main rack structure.

These tubes structurally join the two side frames (Group 1 and Group 2).

Angle: back left

Assembly of Frame Connecting Tubes - back_left

P36 (1" Tube 42.08" length) - connect its 1" M SLIP #1 oriented left links with part 2's 1" F SLIP #3, then its 1" M SLIP #2, which is right-facing, should connect to part 32's 1" F SLIP #3 P37 (1" Tube 42.08" length) - attach its 1" M SLIP #1 facing left to part 3's 1" F SLIP #3, and attach its 1" M SLIP #2 facing right to part 33's 1" F SLIP #3 P50 (1" Tube 42.08" length) - connect its 1" M SLIP #1 oriented right links with part 27's 1" F SLIP #3. Next, attach its 1" M SLIP #2 facing left to part 11's 1" F SLIP #3

1" Tube x 42.08"x 3

Angle: front right

Assembly of Frame Connecting Tubes - front_right

1" Tube x 42.08"x 3

Angle: bottom right

Assembly of Frame Connecting Tubes - bottom_right

1" Tube x 42.08"x 3

Attaching: Top Horizontal Structure Assembly

Forms the upper rack section where equipment/guitars are held.

Attach this assembled structure to the main frame. Connect the bottom-facing 1" Female SLIP of P12 (Elbow) to the top 1" Male SLIP of P51 (1" Tube 8.98" length). Connect the bottom 1" Male SLIP of P51 to the top-facing 1" Female SLIP of P11 (Tee) on the Right Frame. Connect the bottom-facing 1" Female SLIP of P26 (Elbow) to the top 1" Male SLIP of P54 (1" Tube 9" length). Connect the bottom 1" Male SLIP of P54 to the top-facing 1" Female SLIP of P27 (Tee) on the Left Frame.

Angle: back left

Assembly of Top Horizontal Structure Assembly - back_left

P12 (1" 90° Elbow Slip PVC ) - connect its 1" F SLIP #1 oriented bottom links with part 51's 1" M SLIP #1. After that, its 1" F SLIP #2, which is right-facing, should connect to part 13's 1" M SLIP #2 P13 (1" Tube 3" length) - its 1" M SLIP #1, which is right-facing, should connect to part 14's 1" F SLIP #1, also attach its 1" M SLIP #2 facing left to part 12's 1" F SLIP #2 P14 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented left links with part 13's 1" M SLIP #1. After that, attach its 1" F SLIP #2 facing right to part 15's 1" M SLIP #2. Next, its 1" F SLIP #3, which is front-facing, should connect to part 38's 1" M SLIP #2 P15 (1" Tube 5.5" length) - connect its 1" M SLIP #1 oriented right links with part 16's 1" F SLIP #1, then connect its 1" M SLIP #2 oriented left links with part 14's 1" F SLIP #2 P16 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented left links with part 15's 1" M SLIP #1, and its 1" F SLIP #2, which is right-facing, should connect to part 17's 1" M SLIP #2. Additionally, connect its 1" F SLIP #3 oriented front links with part 39's 1" M SLIP #2 P17 (1" Tube 5.4" length) - its 1" M SLIP #1, which is right-facing, should connect to part 18's 1" F SLIP #1, then connect its 1" M SLIP #2 oriented left links with part 16's 1" F SLIP #2 P18 (1" Tee F Slip PVC) - attach its 1" F SLIP #1 facing left to part 17's 1" M SLIP #1. Next, connect its 1" F SLIP #2 oriented right links with part 19's 1" M SLIP #2, then attach its 1" F SLIP #3 facing front to part 40's 1" M SLIP #2 P19 (1" Tube 5.5" length) - its 1" M SLIP #1, which is right-facing, should connect to part 20's 1" F SLIP #1, also attach its 1" M SLIP #2 facing left to part 18's 1" F SLIP #2 P20 (1" Tee F Slip PVC) - connect its 1" F SLIP #1 oriented left links with part 19's 1" M SLIP #1, plus its 1" F SLIP #2, which is right-facing, should connect to part 21's 1" M SLIP #2. Additionally, connect its 1" F SLIP #3 oriented front links with part 41's 1" M SLIP #2 P21 (1" Tube 5.5" length) - attach its 1" M SLIP #1 facing right to part 22's 1" F SLIP #1. Also, its 1" M SLIP #2, which is left-facing, should connect to part 20's 1" F SLIP #2 P22 (1" Tee F Slip PVC) - its 1" F SLIP #1, which is left-facing, should connect to part 21's 1" M SLIP #1, then connect its 1" F SLIP #2 oriented right links with part 23's 1" M SLIP #2. Also, attach its 1" F SLIP #3 facing front to part 42's 1" M SLIP #2 P23 (1" Tube 5.5" length) - connect its 1" M SLIP #1 oriented right links with part 24's 1" F SLIP #1. After that, attach its 1" M SLIP #2 facing left to part 22's 1" F SLIP #2 P24 (1" Tee F Slip PVC) - attach its 1" F SLIP #1 facing left to part 23's 1" M SLIP #1, then its 1" F SLIP #2, which is right-facing, should connect to part 25's 1" M SLIP #2, and attach its 1" F SLIP #3 facing front to part 43's 1" M SLIP #2 P25 (1" Tube 3" length) - its 1" M SLIP #1, which is right-facing, should connect to part 26's 1" F SLIP #1. Next, connect its 1" M SLIP #2 oriented left links with part 24's 1" F SLIP #2 P26 (1" 90° Elbow Slip PVC ) - attach its 1" F SLIP #1 facing left to part 25's 1" M SLIP #1. Next, its 1" F SLIP #2, which is bottom-facing, should connect to part 54's 1" M SLIP #1 P51 (1" Tube 8.98" length) - its 1" M SLIP #1, which is top-facing, should connect to part 12's 1" F SLIP #1. Next, its 1" M SLIP #2, which is bottom-facing, should connect to part 11's 1" F SLIP #2 P54 (1" Tube 9" length) - its 1" M SLIP #1, which is top-facing, should connect to part 26's 1" F SLIP #2, and connect its 1" M SLIP #2 oriented bottom links with part 27's 1" F SLIP #1

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Angle: front right

Assembly of Top Horizontal Structure Assembly - front_right

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Angle: bottom right

Assembly of Top Horizontal Structure Assembly - bottom_right

1" 90° Elbow Slip PVC x 2

1" Tube x 3"x 2

1" Tee Female Slip PVCx 6

1" Tube x 5.5"x 4

1" Tube x 5.4"x 1

1" Tube x 8.98"x 1

1" Tube x 9"x 1

Attaching: Rear Support Bars and Caps

Provides rear support or stops for items placed in the top rack structure.

These bars attach to the Tees (P14, P16, P18, P20, P22, P24) of the Top Horizontal Structure (Group 4) after it has been mounted onto the main frame.

Angle: back left

Assembly of Rear Support Bars and Caps - back_left

P38 (1" Tube 6" length) - its 1" M SLIP #1, which is front-facing, should connect to part 49's 1" F SLIP #1, then its 1" M SLIP #2, which is back-facing, should connect to part 14's 1" F SLIP #3 P39 (1" Tube 6" length) - connect its 1" M SLIP #1 oriented front links with part 48's 1" F SLIP #1, plus attach its 1" M SLIP #2 facing back to part 16's 1" F SLIP #3 P40 (1" Tube 6" length) - its 1" M SLIP #1, which is front-facing, should connect to part 47's 1" F SLIP #1. Next, its 1" M SLIP #2, which is back-facing, should connect to part 18's 1" F SLIP #3 P41 (1" Tube 6" length) - its 1" M SLIP #1, which is front-facing, should connect to part 46's 1" F SLIP #1, then connect its 1" M SLIP #2 oriented back links with part 20's 1" F SLIP #3 P42 (1" Tube 6" length) - its 1" M SLIP #1, which is front-facing, should connect to part 45's 1" F SLIP #1. Next, connect its 1" M SLIP #2 oriented back links with part 22's 1" F SLIP #3 P43 (1" Tube 6" length) - attach its 1" M SLIP #1 facing front to part 44's 1" F SLIP #1, then connect its 1" M SLIP #2 oriented back links with part 24's 1" F SLIP #3 P44 (1" Cap Slip PVC) - attach its 1" F SLIP #1 facing back to part 43's 1" M SLIP #1 P45 (1" Cap Slip PVC) - attach its 1" F SLIP #1 facing back to part 42's 1" M SLIP #1 P46 (1" Cap Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 41's 1" M SLIP #1 P47 (1" Cap Slip PVC) - its 1" F SLIP #1, which is back-facing, should connect to part 40's 1" M SLIP #1 P48 (1" Cap Slip PVC) - connect its 1" F SLIP #1 oriented back links with part 39's 1" M SLIP #1 P49 (1" Cap Slip PVC) - attach its 1" F SLIP #1 facing back to part 38's 1" M SLIP #1

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Angle: front right

Assembly of Rear Support Bars and Caps - front_right

1" Tube x 6"x 6

1" Cap Slip PVCx 6

Angle: bottom right

Assembly of Rear Support Bars and Caps - bottom_right

1" Tube x 6"x 6

1" Cap Slip PVCx 6